No issue with brconfig; you can't set the spanning tree path cost on a non-STP bridge port.
On 2008-05-06, Tobias <[EMAIL PROTECTED]> wrote: > I can initialise a bridge under 4.3 consisting of the interfaces em0 and > em1 with the following configuration: > > /etc $ grep . hostname.em* > hostname.em0:up media autoselect > hostname.em1:up media autoselect > /etc $ cat bridgename.bridge0 > > add em0 > add em1 > maxage 6 > priority 200 > ifcost em0 10 > ifcost em1 20 > up > > But no matter whether after a reboot or setting 'ifcost em0 10' manually, > brconfig says > > /etc $ brconfig bridge0 ifcost em0 10 > brconfig: bridge0: 10: Invalid argument > /etc $ brconfig bridge0 ifcost em0 > brconfig: ifcost requires 2 arguments > > The bridge itself is up, the maxage-parameter can be set, but neither > the priority-parameter (which doesn't change with no error / warning) > nor the ifcost-parameters are set. > > Is there an issue with brconfig(8) in 4.3? > > Please reply on the list. > TIA, Tobias
