Reyk Floeter wrote:
> I just committed the 2nd version of the patch to -current but I still
> need more test reports on devices that used to work.
>
> - Please update to -current (for example ar5212.c 1.44) or use the patch
> that I sent to this list if your AnonCVS is not updated yet.
>
> - Test it on ath0 ar5212/ar5213 devices or any devices that previously
> worked OK. Not the newish ones, but the old ones - I want to make
> sure that it does not break anything in the 4.4 release.
>
> The current summary is: it fixes a few devices, makes 1st gen macbooks
> happy, but not the eeepc, it fixes the MiniCard in my T61, but not
> others with different APs, it does not work on AR2413 nor AR2425
> devices yet. So it is an improvement.
Strange. AR2413 is working now after your diff. However it is 11b only as
for now. Previously, it was unable to associate with access point.
Alexey
OpenBSD 4.4-beta (GENERIC.MP) #0: Tue Jul 29 22:44:42 EEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz ("GenuineIntel"
686-class) 1.73 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,TM2,xTPR
real mem = 526479360 (502MB)
avail mem = 500744192 (477MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/13/07, BIOS32 rev. 0 @
0xfd390, SMBIOS rev. 2.33 @ 0xe3810 (25 entries)
bios0: vendor Acer version "V3.50" date 02/13/2007
bios0: Acer TravelMate 2490
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC HPET MCFG SLIC DBGP APIC BOOT SSDT SSDT
SSDT SSDT SSDT
acpi0: wakeup devices PXS1(S4) PXS2(S4) BCOL(S4) PXS4(S4) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S5) MODM(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus 5 (RP04)
acpiprt6 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpibat0 at acpi0: BAT1 model "GC86503SY90 " type Lion oem "SONY "
acpiac0 at acpi0: AC unit online
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1800 0xe0000/0x1800! 0xe3800/0x800!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xc0000000, size 0x10000000
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 1 int 22 (irq 10)
azalia0: codec[s]: Realtek ALC883, Conexant/0x2bfa, using Realtek ALC883
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1
int 17 (irq 11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1
int 16 (irq 6)
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1
int 18 (irq 11)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1
int 19 (irq 10)
pci4 at ppb3 bus 5
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
int 23 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1
int 19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1
int 16 (irq 6)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1
int 23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 6
bce0 at pci5 dev 1 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1
int 21 (irq 10), address 00:16:d4:b2:1d:10
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
ath0 at pci5 dev 2 function 0 "Atheros AR2413" rev 0x01: apic 1 int 22 (irq 10)
ath0: AR2413 7.8 phy 4.5 rf 5.6, WOR3W, address 00:19:7e:02:12:55
cbb0 at pci5 dev 4 function 0 "ENE CB-712 CardBus" rev 0x10: apic 1
int 16 (irq 6)
"ENE Memory Stick" rev 0x01 at pci5 dev 4 function 1 not configured
sdhc0 at pci5 dev 4 function 2 "ENE SD Controller" rev 0x01: apic 1
int 17 (irq 11)
sdmmc0 at sdhc0
vendor "ENE", unknown product 0x0520 (class memory subclass flash, rev
0x01) at pci5 dev 4 function 3 not configured
"ENE SD/MMC" rev 0x01 at pci5 dev 4 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS541612J9SA00>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PP02> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
1 int 19 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub2 port 2 configuration 1 interface 0 "Acer USB2.0
Camera" rev 2.00/1.00 addr 2
video0 at uvideo0
uvideo0: could not GET probe request: SHORT_XFER
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33204
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
bce0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:16:d4:b2:1d:10
media: Ethernet autoselect (none)
status: no carrier
ath0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:19:7e:02:12:55
groups: wlan egress
media: IEEE802.11 autoselect (DS11 mode 11b)
status: active
ieee80211: nwid j chan 11 bssid 00:1c:10:24:a3:29 92%
inet6 fe80::219:7eff:fe02:1255%ath0 prefixlen 64 scopeid 0x2
inet 192.168.1.104 netmask 0xffffff00 broadcast 192.168.1.255
enc0: flags=0<> mtu 1536
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33204
groups: pflog
