Alexey Suslikov wrote:
Reyk Floeter wrote:
I just committed the 2nd version of the patch to -current but I still
need more test reports on devices that used to work.
- Please update to -current (for example ar5212.c 1.44) or use the patch
that I sent to this list if your AnonCVS is not updated yet.
- Test it on ath0 ar5212/ar5213 devices or any devices that previously
worked OK. Not the newish ones, but the old ones - I want to make
sure that it does not break anything in the 4.4 release.
The current summary is: it fixes a few devices, makes 1st gen macbooks
happy, but not the eeepc, it fixes the MiniCard in my T61, but not
others with different APs, it does not work on AR2413 nor AR2425
devices yet. So it is an improvement.
Strange. AR2413 is working now after your diff. However it is 11b only as
for now. Previously, it was unable to associate with access point.
Alexey
I'm similar results. I had some issues with my AR51213 but now it seems
to work pretty well.
OpenBSD 4.4-beta (GENERIC) #997: Tue Jul 29 10:31:22 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Am5x86 W/B 133/160 ("AuthenticAMD" 486-class)
cpu0: FPU
real mem = 66678784 (63MB)
avail mem = 55214080 (52MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/80/03, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
elansc0 at pci0 dev 0 function 0 "AMD ElanSC520 PCI" rev 0x00: product 0
stepping 1.1, CPU clock 133MHz, reset 40<SCP>
gpio0 at elansc0: 32 pins
ath0 at pci0 dev 16 function 0 "Atheros AR5212" rev 0x01: irq 10
ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6, FCC2A*, address 00:0b:6b:86:60:19
cbb0 at pci0 dev 17 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci0 dev 17 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 5, address 00:00:24:c9:be:2c
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 9, address 00:00:24:c9:be:2d
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x10, lattimer 0x3f
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x10, lattimer 0x3f
pcmcia1 at cardslot1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFX3-2048>
wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f9c5 netmask ffe5 ttymask ffff
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
