> I look for a quiet, small, energy saving and well cooled machine to > make a webserver. I need i386 or amd64. I thought about an apple mac > mini (i know...apple...). How the latest models (core 2 duo) are > supported under openbsd (integrated nic, bsd.mp...) ?
Mac minis run OpenBSD just fine. Mine are running for two years permanently now without any problems. Just a few things: - Only one sensor under OpenBSD (CPU temperature), that's more than enough though, as they only get too hot if the fan breaks, and the sensor can detect that just fine - You need a little tweak in /etc/rc.securelevel to make them start automagically after a power failture: http://marc.info/?l=openbsd-misc&m=120631459418290&w=2 - They need a resistor either in a dongle or build-in to make them start without a monitor attached. Otherwise, see yourself: OpenBSD 4.4-current (GENERIC.MP) #879: Wed Sep 24 12:03:25 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Genuine Intel(R) CPU 1400 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR real mem = 2114367488 (2016MB) avail mem = 2035945472 (1941MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @ 0xe73f0 (39 entries) bios0: vendor Apple Computer, Inc. version "MM11.88Z.0055.B08.0610121326" date 10/12/06 bios0: Apple Computer, Inc. Macmini1,1 acpi0 at bios0: rev 0 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT acpi0: wakeup devices PXS1(S4) PXS2(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Genuine Intel(R) CPU 1400 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: duplicate apic id, remapped to apid 2 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus 2 (RP02) acpiprt3 at acpi0: bus 3 (PCIB) acpiec0 at acpi0: Failed to register address space acpicpu0 at acpi0: C3, C2 acpicpu1 at acpi0: C3, C2 acpibtn0 at acpi0: PWRB acpivideo at acpi0 not configured bios0: ROM list: 0xc0000/0xe600! cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2c06000b2c cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1833 MHz (1404 mV): speeds: 1833, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0x80000000, size 0x10000000 vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and Frequency, rev 0x03) at pci0 dev 7 function 0 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int 22 (irq 11) azalia0: codec[s]: Sigmatel STAC9221 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17 (irq 11) pci1 at ppb0 bus 1 mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC rev. A3 (0x2): apic 2 int 16 (irq 11) msk0 at mskc0 port A: address 00:16:cb:a7:46:69 eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16 (irq 10) pci2 at ppb1 bus 2 ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 2 int 17 (irq 11) ath0: AR5424 10.3 phy 6.1 rf 10.2, WORAW, address 00:17:f2:4d:19:ee uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 21 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19 (irq 11) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16 (irq 10) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 21 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 3 "AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-846, FM3J> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt wd0 at pciide1 channel 0 drive 1: <FUJITSU MHV2080BHPL> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19 (irq 11) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhidev0 at uhub4 port 1 configuration 1 interface 0 "Apple Computer ADB device" rev 2.00/19.65 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub4 port 1 configuration 1 interface 1 "Apple Computer ADB device" rev 2.00/19.65 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 5 buttons wsmouse0 at ums0 mux 0 uhidev2 at uhub4 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/1.10 addr 3 uhidev2: iclass 3/0, 38 report ids uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0 uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0 uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0 softraid0 at root root on wd0a swap on wd0b dump on wd0b Tas.
