On Tue, Nov 11, 2008 at 1:55 PM, Brynet <[EMAIL PROTECTED]> wrote: > Hi Ed, > > I've also seen this behaviour on a OptiPlex GX240, it has a ATI Rage > 128 Pro TF card, the only solution I've found is to change the depth > to 16 instead of the default 24. > > Just add "DefaultDepth 16" to your Screen section. > > I would like to hear an alternative solution, but I can't seem to tell > the different between the two depths. > > Hope that helps.. :-) > > -Brynet > > I have the same problem and I have a defaultdepth of 16. Haven't had this problem with any previous release, just with 4.4. Video card is Radeon 7000. Dmesg:
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Duron(tm) processor ("AuthenticAMD" 686-class, 64KB L2 cache) 1.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 536375296 (511MB) avail mem = 510218240 (486MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/11/02, BIOS32 rev. 0 @ 0xfb4b0, SMBIOS rev. 2.3 @ 0xf0800 (40 entries) bios0: vendor Award Software International, Inc. version "6.00 PG" date 07/11/2002 bios0: VIA Technologies, Inc. VT8363 apm0 at bios0: Power Management spec V1.2 (slowidle) apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf94 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/176 (9 entries) pcibios0: PCI Exclusive IRQs: 5 10 11 pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xc000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "VIA VT8363 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: v2, aperture at 0xe8000000, size 0x10000000 drm at vga1 unsupported pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40 pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-75DEA0> wd0: 16-sector PIO, LBA, 38146MB, 78125000 sectors wd1 at pciide0 channel 0 drive 1: <ST34313A> wd1: 32-sector PIO, LBA, 4126MB, 8452080 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, CD-R PX-240A, 1.00> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x16: irq 5 uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x16: irq 5 viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40: 24-bit timer at 3579545Hz emu0 at pci0 dev 8 function 0 "Creative Labs SoundBlaster Live" rev 0x07: irq 5 ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4) ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D audio0 at emu0 "Creative Labs PCI Gameport Joystick" rev 0x07 at pci0 dev 8 function 1 not configured xl0 at pci0 dev 13 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 11, address 00:10:5a:98:0c:90 exphy0 at xl0 phy 24: 3Com internal media interface isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 biomask e76d netmask ef6d ttymask ffff mtrr: Pentium Pro MTRR support softraid0 at root root on wd0a swap on wd0b dump on wd0b