On Sat, Nov 29, 2008 at 17:43, Kostas Zorbadelos <[EMAIL PROTECTED]> wrote: > On Tuesday 11 November 2008 22:55:49 Brynet wrote: >> Hi Ed, >> >> I've also seen this behaviour on a OptiPlex GX240, it has a ATI Rage >> 128 Pro TF card, the only solution I've found is to change the depth >> to 16 instead of the default 24. >> >> Just add "DefaultDepth 16" to your Screen section. >> >> I would like to hear an alternative solution, but I can't seem to tell >> the different between the two depths. >> >> Hope that helps.. :-) >> >> -Brynet > > Hello, > > I also see this behaviour in my system after clean installation of OpenBSD > 4.4. I didn't see this in previous versions. Here is my dmesg, I run amd64. > Please let me know if I can provide any more information to track down the > problem. Iwill try to upgrade to current in the next day and see if the > problem is present there. The workarounf DefaultDepth 16 did not work for me. > > Kostas
Same issue in my old i386 with ATI Radeon 9600 XT, following stable. My dmesg: OpenBSD 4.4-stable (GENERIC) #1: Sat Nov 29 18:10:44 CET 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) XP ("AuthenticAMD" 686-class, 256KB L2 cache) 1.02 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM X,FXSR,SSE real mem = 536375296 (511MB) avail mem = 510218240 (486MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/20/04, BIOS32 rev. 0 @ 0xfdb10, SMBIOS rev. 2.3 @ 0xf0630 (21 entries) bios0: vendor American Megatrends Inc. version "P1.70" date 08/20/2004 bios0: American Megatrends Inc. K7S41 acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC acpi0: wakeup devices PS2M(S4) PS2K(S4) UAR1(S4) USB1(S4) USB2(S4) EHCI(S4) LAN_ (S4) MDM_(S4) AUD_(S4) PCI0(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc0000/0xd000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03 ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon 9600 XT" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd0000000, size 0x4000000 drm at vga1 unsupported "ATI Radeon 9600 XT Sec" rev 0x00 at pci1 dev 0 function 1 not configured pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25 pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA, channel 0 w ired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <ST380215A> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8164B, 0L06> ATAPI 5/cdrom r emovable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 10, SiS7012 AC97 ac97: codec id 0x434d4983 (C-Media Electronics CMI9761A+) audio0 at auich0 ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 10, version 1.0 , legacy support ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 3, version 1.0, legacy support ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x90: irq 10, address 0 0:0b:6a:b3:60:3a rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12 lm1 at wbsio0 port 0x290/8: W83697HF npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1 biomask ed6d netmask ed6d ttymask ffff mtrr: Pentium Pro MTRR support softraid0 at root root on wd0a swap on wd0b dump on wd0b auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz