I'm trying to install OBSD 4.4-release on this desktop which has two
hard disks of around 465 GB each. If I install on wd0 with only one
partition (/) of 10GB, the installation goes smoothly. But if I try to
allocate /tmp (20g), /home (100g), / (50g), /var (50g), /usr (50g),
swap (3g), the installation hangs after the last file set is installed
(xserv44.tgz): it just sits there and I cannot use my keyboard
anymore. I have waited for about 2 hours for the installation to
proceed to the next step but nothing. Here's my dmesg; Thanks for any
help.
OpenBSD 4.4 (RAMDISK_CD) #857: Tue Aug 12 17:31:49 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz ("GenuineIntel"
686-class) 2.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM
2,CX16,xTPR
real mem = 3740557312 (3567MB)
avail mem = 3634302976 (3465MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/18/08, BIOS32 rev. 0 @
0xe8790, SMBIOS rev. 2.5 @ 0xea0c0 (77 entries)
bios0: vendor Hewlett-Packard version "786F1 v01.24" date 03/18/2008
bios0: Hewlett-Packard HP Compaq dc7800 Convertible Minitower
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus 48 (PCX2)
acpiprt5 at acpi0: bus -1 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 7 (HUB_)
bios0: ROM list: 0xc0000/0xcc00 0xccc00/0x1000 0xcdc00/0x1000 0xe5c00/0xa400!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82Q35 PCIE" rev 0x02: irq 5
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8600 GT" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using irq 10 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q35 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: irq 5,
address 00:0f:fe:d7:ac:1d
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 10
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: irq 11
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02
pci2 at ppb1 bus 32
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: irq 11
pci3 at ppb2 bus 48
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 10
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 11
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 5
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci4 at ppb3 bus 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3500620AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H60L, R90C> ATAPI
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using irq 10 for native-PCI interrupt
wd1 at pciide2 channel 0 drive 0: <ST3500620AS>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd1(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ffed netmask ffed ttymask ffff
biomask ffed netmask ffed ttymask ffff
rd0: fixed, 3800 blocks
umass0 at uhub0 port 2 configuration 1 interface 0 "Generic
USB2.0-CRW" rev 2.00/11.22 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0
0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0
0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0
0/direct removable
sd3: drive offline
umass1 at uhub0 port 4 configuration 1 interface 0 "JetFlash Mass
Storage Device" rev 2.00/1.41 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd4 at scsibus2 targ 1 lun 0: <JetFlash, TS8GJFV30, 8.07> SCSI2
0/direct removable
sd4: 7799MB, 994 cyl, 255 head, 63 sec, 512 bytes/sec, 15974398 sec total
uhub7 at uhub3 port 1 "Logitech Logitech BT Mini-Receiver" rev 2.00/49.00 addr 2
uhidev0 at uhub7 port 2 configuration 1 interface 0 "Logitech Logitech
BT Mini-Receiver" rev 2.00/49.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Logitech Logitech
BT Mini-Receiver" rev 2.00/49.00 addr 4
uhidev1: iclass 3/1, 18 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 5 not configured
uhid at uhidev1 reportid 16 not configured
uhid at uhidev1 reportid 17 not configured
uhid at uhidev1 reportid 18 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz ("GenuineIntel"
686-class) 2.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM
2,CX16,xTPR
cpu0: unknown i686 EBL_CR_POWERON value 3 (0x420c0800)
real mem = 3740557312 (3567MB)
avail mem = 3632455680 (3464MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/18/08, BIOS32 rev. 0 @
0xe8790, SMBIOS rev. 2.5 @ 0xea0c0 (77 entries)
bios0: vendor Hewlett-Packard version "786F1 v01.24" date 03/18/2008
bios0: Hewlett-Packard HP Compaq dc7800 Convertible Minitower
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR
acpi0: wakeup devices COM1(S4) COM2(S4) PCI0(S4) PEG1(S4) PEG2(S4)
IGBE(S4) PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3)
USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) EUS1(S3) EUS2(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus 48 (PCX2)
acpiprt5 at acpi0: bus -1 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 7 (HUB_)
acpicpu0 at acpi0
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xcc00 0xccc00/0x1000 0xcdc00/0x1000 0xe5c00/0xa400!
cpu0 at mainbus0
cpu0: EST: unknown system bus clock
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82Q35 PCIE" rev 0x02: irq 5
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8600 GT" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
"Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using irq 10 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q35 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: irq 5,
address 00:0f:fe:d7:ac:1d
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 10
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: irq 11
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: irq 11
azalia0: codec[s]: Analog Devices/0x1884
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02
pci2 at ppb1 bus 32
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: irq 11
pci3 at ppb2 bus 48
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 10
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 11
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 5
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci4 at ppb3 bus 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3500620AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H60L, R90C> ATAPI
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using irq 10 for native-PCI interrupt
wd1 at pciide2 channel 0 drive 0: <ST3500620AS>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd1(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fd6d netmask fd6d ttymask ffff
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 2 configuration 1 interface 0 "Generic
USB2.0-CRW" rev 2.00/11.22 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0
0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0
0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0
0/direct removable
sd3: drive offline
umass1 at uhub0 port 4 configuration 1 interface 0 "JetFlash Mass
Storage Device" rev 2.00/1.41 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd4 at scsibus2 targ 1 lun 0: <JetFlash, TS8GJFV30, 8.07> SCSI2
0/direct removable
sd4: 7799MB, 994 cyl, 255 head, 63 sec, 512 bytes/sec, 15974398 sec total
uhub7 at uhub3 port 1 "Logitech Logitech BT Mini-Receiver" rev 2.00/49.00 addr 2
uhidev0 at uhub7 port 2 configuration 1 interface 0 "Logitech Logitech
BT Mini-Receiver" rev 2.00/49.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Logitech Logitech
BT Mini-Receiver" rev 2.00/49.00 addr 4
uhidev1: iclass 3/1, 18 report ids
ums0 at uhidev1 reportid 2: 12 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
ums1 at uhidev1 reportid 5: 8 buttons, Z dir
wsmouse1 at ums1 mux 0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
uhid4 at uhidev1 reportid 18: input=45, output=45, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
uhidev2 at uhub5 port 2 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/2.00 addr 2
uhidev2: iclass 3/1
ums2 at uhidev2: 16 buttons, Z dir
wsmouse2 at ums2 mux 0
uhidev3 at uhub5 port 2 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/2.00 addr 2
uhidev3: iclass 3/0, 17 report ids
uhid5 at uhidev3 reportid 3: input=4, output=0, feature=0
uhid6 at uhidev3 reportid 16: input=6, output=6, feature=0
uhid7 at uhidev3 reportid 17: input=19, output=19, feature=0
