[ Moving to [email protected], tech@ is for 'Discussion of technical topics for OpenBSD developers and advanced users. This is not a "tech support" forum, do not use it as such.' <www.openbsd.org/mail.html> ]
On 2009/01/25 23:51, BOG BOG wrote: > Hello, > > In this weekend i bought a fujitsu-siemens machine, with the following > configuration: >From your description you could be trying any of these: i386 4.4, amd64 4.4, i386 -current, amd64 -current. Try a different one. If it still fails with -current you will need to get dmesg out of the machine somehow, see FAQ 4.15 (you can use a USB stick instead a floppy disk, it will probably show up as /dev/sd0i). > Pentium Core duo Intel E2200, 2.20 Ghz > FSB 800 Mhz > 3 Gb ram: > 2 GB (1 module(s) with 2 GB, DDR2), 800 MHz > 1 GB (1 module(s) with 1 GB, DDR2), 800 MHz > > Hdd 500 Gb, Serial ATA II > > The following is copy/paste from the data sheet(found here: > http://sp.fujitsu-siemens.com/dmsp/docs/ds-esprimo-p3510.pdf) > > Mainboard type D2750 > Formfactor 5BTX > Chipset Intel. G31 > Processor socket LGA 775 > Processor quantity maximum 1 > System bus (FSB / HT / QPI) up to 1333 MHz > Memory slots 2 DIMM (DDR2) > Supported capacity RAM (max.) 8 GB > Memory frequency 800 MHz > Memory notes With future modules. > Dual channel support. > For dual channel performance, 2 memory > modules have to be ordered. Capacity per > channel has to be the same. > LAN 10/100/1000 MBit/s Realtek RTL8111C > BIOS version Phoenix 6.0 > BIOS features BIOS Flash EPROM update by software > Recovery BIOS > Audio codec Realtek ALC262 > Audio features High Definition audio > > > The problem is that after the process of creating the partitions, and copying > the base modules, the machine freezes. > > I do not install xserver modules, as I want it to be a server, an right after > the game44.tgz module is copied on the hard drive, the system freezes. > > I tried to exclude game44.tgz, in a new installation process, and after > man44.tgz, the system freezes. > > I really do not understand the problem, because the hard drive as well as cd > drive are detected and properly initialized. > > Unfortunately, I do not have the dmesg > > I do not want to put other os on this machine, because i like OpenBSD. > > I really apreciate any help in this direction, > > Thank you very much, > > bogdan
