Hi Misc,
Forgot to include the dmesg;
OpenBSD 4.5-beta (GENERIC) #61: Wed Feb 11 13:33:23 WIT 2009
r...@greenbridgevpn.mygreenlinks.net:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error d<fixed_disk,invalid_time>
cpu0: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem = 2143842304 (2044MB)
avail mem = 2064744448 (1969MB)
RTC BIOS diagnostic error d<fixed_disk,invalid_time>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/12/07, SMBIOS rev. 2.5 @
0x7fdfd000 (63 entries)
bios0: vendor Intel Corporation version
"S3200X38.86B.00.00.0045.082820081329" date 08/28/2008
bios0: Intel Corporation S3210SH
acpi0 at bios0: rev 2
acpi0: tables DSDT SLIC FACP APIC WDDT MCFG HPET SPCR SSDT SSDT SSDT SSDT
SSDT HEST BERT ERST EINJ DMAR
acpi0: wakeup devices SLPB(S5) NPE1(S5) NPE6(S5) P32_(S5) PS2M(S1)
PS2K(S1) ILAN(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) EHC2(S1) UH42(S1) UHC5(S1)
UHC6(S1) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (NPE1)
acpiprt2 at acpi0: bus -1 (NPE6)
acpiprt3 at acpi0: bus 3 (P32_)
acpiprt4 at acpi0: bus 1 (PEX0)
acpiprt5 at acpi0: bus -1 (PEX1)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 2 (PEX4)
acpiprt9 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: FVS, 3000, 2000 MHz
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x00
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 5 int 20
(irq 11), address 00:15:17:28:2a:d3
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 18
(irq 9)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 21
(irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 17
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 5 int 17
(irq 11)
pci1 at ppb0 bus 1
em1 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic
5 int 16 (irq 11), address 00:15:17:86:53:14
em2 at pci1 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic
5 int 17 (irq 10), address 00:15:17:86:53:15
ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 5 int 17
(irq 11)
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 23
(irq 11)
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 19
(irq 11)
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 5 int 18
(irq 9)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 23
(irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci3 at ppb2 bus 3
skc0 at pci3 dev 0 function 0 "D-Link Systems DGE-530T B1" rev 0x11, Yukon
Lite (0x9): apic 5 int 16 (irq 11)
sk0 at skc0 port A: address 00:1c:f0:0f:4d:05
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
skc1 at pci3 dev 1 function 0 "D-Link Systems DGE-530T B1" rev 0x11, Yukon
Lite (0x9): apic 5 int 17 (irq 10)
sk1 at skc1 port A: address 00:1c:f0:d1:a3:5d
eephy1 at sk1 phy 0: 88E1011 Gigabit PHY, rev. 5
em3 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 5
int 18 (irq 9), address 00:15:17:28:2a:d1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 5 int 21 (irq 10) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <MAXTOR STM380215AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 5
int 18 (irq 9)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 5 int 21 (irq 10) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Hi Guys,
When upgrading my OBSD 4.5-beta machine, I got
===> usr.sbin/bind
PATH="/bin:/usr/bin:/sbin:/usr/sbin" CC="cc" CFLAGS="-O2 -pipe "
LDFLAGS="" INSTALL_PROGRAM="install -c -s" sh
/usr/src/usr.sbin/bind/configure --prefix=/usr --localstatedir=/var
--sysconfdir=/etc --disable-shared --disable-threads
--disable-openssl-version-check
Segmentation fault (core dumped)
*** Error code 139
Stop in /usr/src/usr.sbin/bind (line 70 of
/usr/src/usr.sbin/bind/Makefile.bsd-wrapper).
*** Error code 1
Stop in /usr/src/usr.sbin (line 48 of /usr/share/mk/bsd.subdir.mk).
*** Error code 1
Stop in /usr/src (line 48 of /usr/share/mk/bsd.subdir.mk).
*** Error code 1
Stop in /usr/src (line 73 of Makefile).
on line 70 /usr/src/usr.sbin/bind/Makefile.bsd-wrapper would be;
66: config.status:
67: PATH="/bin:/usr/bin:/sbin:/usr/sbin" \
68: ${XCFLAGS} \
69: INSTALL_PROGRAM="${INSTALL} ${INSTALL_COPY} ${INSTALL_STRIP}" \
70: sh ${.CURDIR}/configure ${CONFIGURE_OPTS}
Any suggestions is much appreciated.
Thanks,
Insan
--
insandotpraja(at)gmaildotcom
