On Sat, Mar 07, 2009 at 06:58:39PM +0000, Nigel J. Taylor wrote:
> I have found the mouse pointer being locked to the right edge as well, and
> very
> annoying. I can normally recover, the I move the middle mouse button up/down
> and
> press escape, that seems to release the mouse pointer for me, not much help if
> you have a two button mouse. I use an amd64 current build, and I found the
> issue
> is not confined to firefox/gnash.
what window manager are you using?
> Regards
>
> Nigel Taylor
>
> Ed Ahlsen-Girard wrote:
> > Running current from a Feb 28 snapshot, I have found that if either
> > mplayer or gnash (from snapshots) are installed, and if embedded media
> > gain focus in FireFox, the mouse pointer will slide to the right edge of
> > the window and stay there until the system is restarted. The pointer
> > can be moved up and down along the edge, but will not leave it, and
> > focus cannot be moved to another window. Ctrl-arrow keys have no
> > effect. A gnash core file of 8064892 bytes exists. Dmesg below, core
> > on request.
> >
> > Ed Ahlsen-Girard
> >
> > OpenBSD 4.4-current (GENERIC) #6: Fri Mar 6 22:42:12 CST 2009
> > e...@puff.waynel.local:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 499 MHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> >
> > real mem = 335118336 (319MB)
> > avail mem = 315379712 (300MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90,
> > SMBIOS rev. 2.2 @ 0xfb410 (64 entries)
> > bios0: vendor Dell Computer Corporation version "A10" date 08/01/01
> > bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+
> > apm0 at bios0: Power Management spec V1.2
> > apm0: AC on, battery charge unknown
> > acpi at bios0 function 0x0 not configured
> > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries)
> > pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA"
> > rev 0x00)
> > pcibios0: PCI bus #2 is the last bus
> > bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000
> > cpu0 at mainbus0: (uniprocessor)
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> > intelagp0 at pchb0
> > agp0 at intelagp0: aperture at 0xf0000000, size 0x4000000
> > ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> > pci1 at ppb0 bus 1
> > "ATI Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured
> > piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> > channel 0 wired to compatibility, channel 1 wired to compatibility
> > wd0 at pciide0 channel 0 drive 0: <Maxtor 91024D4>
> > wd0: 16-sector PIO, LBA, 9765MB, 19999728 sectors
> > wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0>
> > wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus0 at atapiscsi0: 2 targets, initiator 7
> > cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8430, 0024> ATAPI 5/cdrom
> > removable
> > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> > uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
> > piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMBus
> > disabled
> > vga1 at pci0 dev 14 function 0 "ATI Radeon 9200 SE Sec" rev 0x01
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > radeondrm0 at vga1: irq 9
> > drm0 at radeondrm0
> > ppb1 at pci0 dev 15 function 0 "DEC 21152 PCI-PCI" rev 0x03
> > pci2 at ppb1 bus 2
> > ohci0 at pci2 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9,
> > version 1.0, legacy support
> > ehci0 at pci2 dev 11 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 10
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
> > usb1 at ohci0: USB revision 1.0
> > uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
> > xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11,
> > address 00:c0:4f:22:a7:b8
> > exphy0 at xl0 phy 24: 3Com internal media interface
> > isa0 at piixpcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pmsi0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pmsi0 mux 0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > isapnp0 at isa0 port 0x279: read port 0x203
> > wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port
> > 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0)
> > audio0 at wss1
> > joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8
> > "CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured
> > "CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > biomask ef45 netmask ef45 ttymask ffdf
> > mtrr: Pentium Pro MTRR support
> > ugen0 at uhub1 port 2 "OMNIKEY AG Smart Card Reader USB" rev 1.10/2.00
> > addr 2
> > softraid0 at root
> > root on wd1a swap on wd1b dump on wd1b
> > radeondrm0: Setting GART location based on new memory map
> > radeondrm0: Loading R200 Microcode
> > radeondrm0: writeback test succeeded in 1 usecs
>
--
jake...@sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org
