Hi, > On Sat, Mar 07, 2009 at 06:58:39PM +0000, Nigel J. Taylor wrote: >> I have found the mouse pointer being locked to the right edge as well, and >> very >> annoying. I can normally recover, the I move the middle mouse button up/down >> and >> press escape, that seems to release the mouse pointer for me, not much help >> if >> you have a two button mouse. I use an amd64 current build, and I found the >> issue >> is not confined to firefox/gnash. > > what window manager are you using? Mainly kde, also run others, can't be sure, I think had the same happen with some other window managers.
> >> Regards >> >> Nigel Taylor >> >> Ed Ahlsen-Girard wrote: >>> Running current from a Feb 28 snapshot, I have found that if either >>> mplayer or gnash (from snapshots) are installed, and if embedded media >>> gain focus in FireFox, the mouse pointer will slide to the right edge of >>> the window and stay there until the system is restarted. The pointer >>> can be moved up and down along the edge, but will not leave it, and >>> focus cannot be moved to another window. Ctrl-arrow keys have no >>> effect. A gnash core file of 8064892 bytes exists. Dmesg below, core >>> on request. >>> >>> Ed Ahlsen-Girard >>> >>> OpenBSD 4.4-current (GENERIC) #6: Fri Mar 6 22:42:12 CST 2009 >>> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC >>> cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 499 MHz >>> cpu0: >>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE >>> >>> real mem = 335118336 (319MB) >>> avail mem = 315379712 (300MB) >>> mainbus0 at root >>> bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90, >>> SMBIOS rev. 2.2 @ 0xfb410 (64 entries) >>> bios0: vendor Dell Computer Corporation version "A10" date 08/01/01 >>> bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+ >>> apm0 at bios0: Power Management spec V1.2 >>> apm0: AC on, battery charge unknown >>> acpi at bios0 function 0x0 not configured >>> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 >>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries) >>> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" >>> rev 0x00) >>> pcibios0: PCI bus #2 is the last bus >>> bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000 >>> cpu0 at mainbus0: (uniprocessor) >>> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >>> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 >>> intelagp0 at pchb0 >>> agp0 at intelagp0: aperture at 0xf0000000, size 0x4000000 >>> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 >>> pci1 at ppb0 bus 1 >>> "ATI Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured >>> piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 >>> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, >>> channel 0 wired to compatibility, channel 1 wired to compatibility >>> wd0 at pciide0 channel 0 drive 0: <Maxtor 91024D4> >>> wd0: 16-sector PIO, LBA, 9765MB, 19999728 sectors >>> wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0> >>> wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors >>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 >>> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 >>> atapiscsi0 at pciide0 channel 1 drive 0 >>> scsibus0 at atapiscsi0: 2 targets, initiator 7 >>> cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8430, 0024> ATAPI 5/cdrom >>> removable >>> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 >>> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11 >>> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMBus >>> disabled >>> vga1 at pci0 dev 14 function 0 "ATI Radeon 9200 SE Sec" rev 0x01 >>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >>> radeondrm0 at vga1: irq 9 >>> drm0 at radeondrm0 >>> ppb1 at pci0 dev 15 function 0 "DEC 21152 PCI-PCI" rev 0x03 >>> pci2 at ppb1 bus 2 >>> ohci0 at pci2 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9, >>> version 1.0, legacy support >>> ehci0 at pci2 dev 11 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 10 >>> usb0 at ehci0: USB revision 2.0 >>> uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 >>> usb1 at ohci0: USB revision 1.0 >>> uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 >>> xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11, >>> address 00:c0:4f:22:a7:b8 >>> exphy0 at xl0 phy 24: 3Com internal media interface >>> isa0 at piixpcib0 >>> isadma0 at isa0 >>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >>> pckbc0 at isa0 port 0x60/5 >>> pckbd0 at pckbc0 (kbd slot) >>> pckbc0: using irq 1 for kbd slot >>> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >>> pmsi0 at pckbc0 (aux slot) >>> pckbc0: using irq 12 for aux slot >>> wsmouse0 at pmsi0 mux 0 >>> pcppi0 at isa0 port 0x61 >>> midi0 at pcppi0: <PC speaker> >>> spkr0 at pcppi0 >>> lpt0 at isa0 port 0x378/4 irq 7 >>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 >>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec >>> isapnp0 at isa0 port 0x279: read port 0x203 >>> wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port >>> 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0) >>> audio0 at wss1 >>> joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8 >>> "CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured >>> "CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured >>> usb2 at uhci0: USB revision 1.0 >>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >>> biomask ef45 netmask ef45 ttymask ffdf >>> mtrr: Pentium Pro MTRR support >>> ugen0 at uhub1 port 2 "OMNIKEY AG Smart Card Reader USB" rev 1.10/2.00 >>> addr 2 >>> softraid0 at root >>> root on wd1a swap on wd1b dump on wd1b >>> radeondrm0: Setting GART location based on new memory map >>> radeondrm0: Loading R200 Microcode >>> radeondrm0: writeback test succeeded in 1 usecs > Regards Nigel Taylor
