I have had this LG GGC-H20L Blu-ray/HD-DVD reader. I got it because I
made the mistake of buying several HD-DVDs before the format wars were
over, plus I wanted to make backups of my HD movies. I installed this
in my quad-core server, and booted the system. in the dmesg, I see
the following:
cd0 at scsibus0 targ 4 lun 0: <HL-DT-ST, BDDVDRW GGC-H20L, 1.03> ATAPI
5/cdrom removable
I did confirm that this the latest firmware, and it says "ATAPI 5",
but it's connected via SATA connection.
I am able to mount DVD's and do a dump from mplayer to a VOB on the
harddrive. I can view files on the DVD, and copy from it to the
harddrive. The problem comes when I attempt to mount a blu-ray or
hd-dvd disc. I put the disc in, and when I try to mount it using
"mount /dev/cd0c /cdrom", the drive light flashes two or three times,
and then the system locks up.
I can no longer do anything lose my USB keyboard, and I have connected
a PS2 keyboard to the system. I can do "Ctrl-C", and "Ctrl-Z", and I
see output on the screen, but no more prompt. I lose network
connectivity, and cannot even ping the system. I am using the
snapshots from 31 March, and I am still getting the same issue.
Is this an issue with the HD discs not being supported by the OS, or
is the drive not fully supported? Does OpenBSD support the UDF format
that these discs use? Maybe that's the issue... but it shouldn't
lock a system up when you try to mount the disc...
I have included the GENERIC.MP dmesg below.
If I need to send anything else, please let me know... I'm using just
the console, no window manager or program other than "mount"
regards,
Bryan
OpenBSD 4.5-current (GENERIC) #29: Tue Mar 31 09:58:34 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,
DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3488833536 (3327MB)
avail mem = 3384713216 (3227MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/23/08, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.5 @ 0xf06e0 (54 entries)
bios0: vendor American Megatrends Inc. version "5.32" date 10/23/2008
bios0: HP-Pavilion FK484AV-ABA m9400t
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SLIC SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S3) PS2M(S3) USB0(S3)
USB1(S3) USB2(S3) USB5(S3) EUSB(S3) USB3(S3) USB4(S3) USBE(S3) GBE_(S
4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 3 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus 2 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpicpu0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 (irq 5)
pci1 at ppb0 bus 5
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 9300 GE" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4
int 16 (irq 5)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4
int 21 (irq 7)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4
int 18 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02:
apic 4 int 22 (irq 3)
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4
int 17 (irq 11)
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Creative Labs PCIE-PCI" rev 0x00
pci3 at ppb2 bus 4
azalia1 at pci3 dev 0 function 0 "Creative Labs SoundBlaster X-Fi
Xtreme" rev 0x00: apic 4 int 16 (irq 5)
azalia1: codecs: Creative Labs/0x000a
audio1 at azalia1
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4
int 18 (irq 10)
pci4 at ppb3 bus 2
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C
(0x3c00), apic 4 int 18 (irq 10), address 00:23:54:3b:67:88
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4
int 23 (irq 14)
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4
int 19 (irq 15)
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4
int 18 (irq 10)uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev
0x02: apic 4 int 16 (irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4
int 23 (irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 1
puc0 at pci5 dev 0 function 0 "NetMos Nm9835" rev 0x01: ports: 1 com
com3 at puc0 port 0 apic 4 int 17 (irq 11): ns16550a, 16 byte fifo
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 4
int 19 (irq 15), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200AAJS-6, 01.0> SCSI3 0/direct fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
cd0 at scsibus0 targ 4 lun 0: <HL-DT-ST, BDDVDRW GGC-H20L, 1.03> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic
4 int 18 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
extent `pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xefffffff
0xf8f00000 - 0xf8ffffff
0xf9ef8000 - 0xf9efbfff
0xf9efec00 - 0xf9effcff
0xf9f00000 - 0xfed03fff
0xfed14000 - 0xfed19fff
0xfeda0000 - 0xfedbffff
0xfee00000 - 0xfeefffff
0xffe00000 - 0xffffffff
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub1 port 5 configuration 1 interface 0 "Generic
USB2.0-CRW" rev 2.00/51.95 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0
0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0
0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd3: drive offline
sd4 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0
0/direct removable
sd4: drive offline
uhidev0 at uhub1 port 5 configuration 1 interface 1 "Generic
USB2.0-CRW" rev 2.00/51.95 addr 2
uhidev0: iclass 3/0
uhid0 at uhidev0: input=1, output=0, feature=0
uhidev1 at uhub7 port 2 configuration 1 interface 0 "Logitech USB
Receiver" rev 1.10/38.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub7 port 2 configuration 1 interface 1 "Logitech USB
Receiver" rev 1.10/38.10 addr 2
uhidev2: iclass 3/1, 17 report ids
ums0 at uhidev2 reportid 2: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid1 at uhidev2 reportid 3: input=4, output=0, feature=0
uhid2 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
