Hi,
perhaps this is just some stupid "where is the unmute button thing", but I
don't get it working (no sound with aucat started or the other way).
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 2
int 22 (irq 14)
azalia0: codecs: Realtek ALC885
When I'm plugging in some headphone, the normal line-out works fine,
but I don't get a signal over SPDIF.
This is via the non-optical coax-out.
If you need any additional output please tell me.
audioctl and mixerctl output:
name=HD-Audio
version=1.0
config=azalia0
encodings=slinear_le:16,slinear_le:20,slinear_le:24
properties=full_duplex,independent
full_duplex=1
fullduplex=1
blocksize=11648
hiwat=2
lowat=1
output_muted=0
monitor_gain=0
mode=play,record
play.rate=44100
play.channels=2
play.precision=16
play.encoding=slinear_le
play.gain=126
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=1
play.active=0
play.buffer_size=65536
play.block_size=11648
play.errors=0
record.rate=44100
record.channels=2
record.precision=16
record.encoding=slinear_le
record.gain=125
record.balance=32
record.port=0x0
record.avail_ports=0x0
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=1
record.active=0
record.buffer_size=65536
record.block_size=11648
record.errors=0
record.adc_mute=off [ off on ]
record.adc=125,125
record.adc2_mute=off [ off on ]
record.adc2=125,125
record.adc3_mute=off [ off on ]
record.adc3=125,125
record.dig-adc_source=SPDIF-in [ SPDIF-in ]
inputs.mix_source=mic,mic2,line-in,hp,cd,beep,line,line2,line3,line4 { mic
mic2 line-in hp cd beep line line2 line3 line4 }
inputs.mix_mic=120,120
inputs.mix_mic2=120,120
inputs.mix_line-in=120,120
inputs.mix_hp=120,120
inputs.mix_cd=120,120
inputs.mix_beep=120,120
inputs.mix_line=120,120
inputs.mix_line2=120,120
inputs.mix_line3=120,120
inputs.mix_line4=120,120
outputs.mix2=126,126
inputs.mix2_source=dac,mix { dac mix }
outputs.mix3=126,126
inputs.mix3_source=dac2,mix { dac2 mix }
outputs.mix4=126,126
inputs.mix4_source=dac3,mix { dac3 mix }
outputs.mix5=126,126
inputs.mix5_source=dac4,mix { dac4 mix }
outputs.line_source=mix2 [ mix2 mix3 mix4 mix5 mix9 ]
outputs.line_mute=off [ off on ]
inputs.line=85,85
outputs.line_dir=output [ none output input input-vr0 input-vr50 input-vr80
input-vr100 ]
outputs.line_boost=off [ off on ]
outputs.line2_source=mix3 [ mix2 mix3 mix4 mix5 mix9 ]
outputs.line2_mute=off [ off on ]
inputs.line2=85,85
outputs.line2_dir=output [ none output input input-vr0 input-vr50
input-vr80 input-vr100 ]
outputs.line2_boost=off [ off on ]
outputs.line3_source=mix4 [ mix2 mix3 mix4 mix5 mix9 ]
outputs.line3_mute=off [ off on ]
inputs.line3=85,85
outputs.line3_dir=output [ none output input ]
outputs.line3_boost=off [ off on ]
outputs.line4_source=mix5 [ mix2 mix3 mix4 mix5 mix9 ]
outputs.line4_mute=off [ off on ]
inputs.line4=85,85
outputs.line4_dir=output [ none output input ]
outputs.line4_boost=off [ off on ]
outputs.mic_source=mix2 [ mix2 mix3 mix4 mix5 mix9 ]
outputs.mic_mute=off [ off on ]
inputs.mic=85,85
outputs.mic_dir=input-vr80 [ none output input input-vr0 input-vr50
input-vr80 input-vr100 ]
outputs.mic_boost=off [ off on ]
outputs.mic2_source=mix2 [ mix2 mix3 mix4 mix5 mix9 ]
outputs.mic2_mute=off [ off on ]
inputs.mic2=85,85
outputs.mic2_dir=input-vr80 [ none output input input-vr0 input-vr50
input-vr80 input-vr100 ]
outputs.mic2_boost=off [ off on ]
outputs.line-in_source=mix2 [ mix2 mix3 mix4 mix5 mix9 ]
outputs.line-in_mute=off [ off on ]
inputs.line-in=85,85
outputs.line-in_dir=input [ none output input input-vr0 input-vr50
input-vr80 input-vr100 ]
outputs.line-in_boost=off [ off on ]
outputs.hp_source=mix2 [ mix2 mix3 mix4 mix5 mix9 ]
outputs.hp_mute=off [ off on ]
inputs.hp=85,85
outputs.hp_dir=output [ none output input input-vr0 input-vr50 input-vr80
input-vr100 ]
outputs.hp_boost=off [ off on ]
outputs.SPDIF_source=dig-dac [ dig-dac ]
record.adc3_source=mic,mic2,line-in,hp,cd,beep,line,line2,line3,line4,mix {
mic mic2 line-in hp cd beep line line2 line3 line4 mix }
record.adc2_source=mic,mic2,line-in,hp,cd,beep,line,line2,line3,line4,mix {
mic mic2 line-in hp cd beep line line2 line3 line4 mix }
record.adc_source=mic,mic2,line-in,hp,cd,beep,line,line2,line3,line4,mix {
mic mic2 line-in hp cd beep line line2 line3 line4 mix }
outputs.mix9=126,126
inputs.mix9_source=dac5,mix { dac5 mix }
outputs.line_sense=unplugged [ unplugged plugged ]
outputs.line2_sense=unplugged [ unplugged plugged ]
outputs.line3_sense=unplugged [ unplugged plugged ]
outputs.line4_sense=unplugged [ unplugged plugged ]
outputs.mic_sense=unplugged [ unplugged plugged ]
outputs.mic2_sense=unplugged [ unplugged plugged ]
outputs.line-in_sense=unplugged [ unplugged plugged ]
outputs.hp_sense=unplugged [ unplugged plugged ]
outputs.master=126,126
outputs.master.mute=off [ off on ]
outputs.master.slaves=mix2,line,hp { mix2 mix3 mix4 mix5 line line2 line3
line4 mic mic2 line-in hp mix9 }
record.volume=125,125
record.volume.mute=off [ off on ]
record.volume.slaves=adc,adc2,adc3 { adc adc2 adc3 line line2 line3 line4
mic mic2 line-in hp }
inputs.usingdac=0203040525 [ 0203040525 06 ]
record.usingadc=070809 [ 070809 0a ]
root 17109 0.0 0.0 372 816 ?? Is 4:50PM 0:00.11 aucat -l
root 7352 0.0 0.0 264 252 p0 R+/1 4:52PM 0:00.00 grep aucat
MPlayer 1.0rc2-3.3.5 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (Family: 6, Model: 15,
Stepping: 11)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
Playing song44.mp3.
Audio file file format detected.
Clip info:
Title: Trial of the BSD Knights
Artist: OpenBSD
Album:
Year: 2008
Comment:
Genre: Unknown
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 256.0 kbit/18.14% (ratio: 32000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [sndio] 44100Hz 2ch s16le (2 bytes per sample)
OpenBSD 4.5-current (GENERIC.MP) #24: Fri Apr 3 13:01:46 MDT 2009
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3755868160 (3581MB)
avail mem = 3633422336 (3465MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F1" date
11/23/2007
bios0: Gigabyte Technology Co., Ltd. X38-DS4
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET MCFG APIC
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
HUB0(S5) UAR1(S3) IGBE(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) US31(S3)
USB4(S3) USB5(S3) USBE(S3) USE2(S3) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2907.38 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 323MHz
cpu1 at mainbus0: apid 3 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2907.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 4MB 64b/line 16-way L2 cache
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2907.01 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu2: 4MB 64b/line 16-way L2 cache
cpu3 at mainbus0: apid 2 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2907.01 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu3: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus 4 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus 5 (PEX5)
acpiprt7 at acpi0: bus 6 (HUB0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82X38 Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "Intel 82X38 PCIE" rev 0x01: apic 2 int 16
(irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 9600 GT" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 6 function 0 "Intel 82X38 PCIE" rev 0x01: apic 2 int 16
(irq 10)
pci2 at ppb1 bus 2
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 16
(irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21
(irq 9)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18
(irq 3)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 18
(irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 2
int 22 (irq 14)
azalia0: codecs: Realtek ALC885
audio0 at azalia0
ppb2 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int 16
(irq 10)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 2 int 19
(irq 15)
pci4 at ppb3 bus 4
jmb0 at pci4 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 19 (irq 15), AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 19 (irq 15) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP1203N>
wd0: 16-sector PIO, LBA48, 114497MB, 234490943 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 2 int 17
(irq 11)
pci5 at ppb4 bus 5
re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800),
apic 2 int 17 (irq 11), address 00:1a:4d:5f:a1:52
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23
(irq 5)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19
(irq 15)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18
(irq 3)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23
(irq 5)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci6 at ppb5 bus 6
fxp0 at pci6 dev 1 function 0 "Intel 8255x" rev 0x0c, i82550: apic 2 int 19
(irq 15), address 00:02:b3:ac:00:7d
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
ahci1 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 2 int 19
(irq 15), AHCI 1.2
scsibus1 at ahci1: 32 targets
cd0 at scsibus1 targ 3 lun 0: <TSSTcorp, CDDVDW SH-S203D, SB00> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int
18 (irq 3)
iic0 at ichiic0
iic0: addr 0x4e 00=02 02=1b 03=1b 04=2e 12=ff 13=0f 26=03 28=83 29=12 2a=12
2b=28 words 00=0200 01=001b 02=1b1b 03=1b2e 04=2e00 05=0000 06=0000 07=0000
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 4, EC port 0x290
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 1 "X10 Wireless Technology Inc USB Receiver" rev
1.10/1.00 addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/30.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 0 "NOVATEK USB Keyboard"
rev 1.10/1.12 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub3 port 2 configuration 1 interface 1 "NOVATEK USB Keyboard"
rev 1.10/1.12 addr 3
uhidev2: iclass 3/0, 4 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev2 reportid 4: input=2, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
