On Fri, 5 Jun 2009 06:54:05 -0600 Duncan Patton a Campbell <[email protected]> wrote:
> Howdy Victor? > > I appear to be having the same problems with the same card. > > Do you have any news? > > Thanks, > > Dhu > I read somewhere to disable the radeondrm driver in kernel and this has worked so far. Dhu > > On Fri, 29 May 2009 10:33:21 +0200 > "Viktor Varheit" <[email protected]> wrote: > > > Hi, > > > > according to radeon(4) my graphics card is supported, but I > > cannot get hardware acceleration to work. Booting with > > "disable radeondrm" in UKC and then running "startx" works > > fine. Doing the same with "enable radeondrm" (which is the > > default in the GENERIC kernel) appears to freeze the machine. > > The screen goes blank, and the monitor enters standby mode. > > > > Sometimes the computer shuts down after pressing the power > > button, but most of the time it can only be forced off by > > holding the power button. > > > > Trying several options in xorg.conf did not advance things. > > > > I booted with a serial console to see if any messages appeared > > after entering "startx". This is what I got: > > > > radeondrm0: Setting GART location based on new memory map > > radeondrm0: writeback test failed > > radeondrm0: wait idle failed status : 0x80010140 0x00000000 > > radeondrm0: wait idle failed status : 0x80010140 0x00000000 > > radeondrm0: wait idle failed status : 0x80010140 0x00000000 > > ... > > > > The last message is repeated over and over until the machine > > appears to freeze. The time it takes to get to that point > > varies. > > > > After setting 'Option "AGPFastWrite" "on"' in xorg.conf > > no messages were output at all, but that was the only > > apparent difference. > > > > Setting "AccelMethod" to "EXA" also did not change anything. > > > > Using no xorg.conf at all also did not work. > > > > Anyway, here's my xorg.conf and dmesg. I hope someone > > can give me a hint. > > > > Vic > > > > > > +++ xorg.conf +++ > > Section "ServerLayout" > > Identifier "X.org Configured" > > Screen 0 "Screen0" 0 0 > > InputDevice "Mouse0" "CorePointer" > > InputDevice "Keyboard0" "CoreKeyboard" > > EndSection > > > > Section "Files" > > ModulePath "/usr/X11R6/lib/modules" > > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > > FontPath "/usr/X11R6/lib/X11/fonts/TTF/" > > FontPath "/usr/X11R6/lib/X11/fonts/OTF" > > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > > EndSection > > > > Section "Module" > > Load "dbe" > > Load "dri" > > Load "extmod" > > Load "glx" > > Load "freetype" > > EndSection > > > > Section "InputDevice" > > Identifier "Keyboard0" > > Driver "kbd" > > EndSection > > > > Section "InputDevice" > > Identifier "Mouse0" > > Driver "mouse" > > Option "Protocol" "wsmouse" > > Option "Device" "/dev/wsmouse" > > Option "ZAxisMapping" "4 5 6 7" > > EndSection > > > > Section "Monitor" > > #DisplaySize 340 270 # mm > > Identifier "Monitor0" > > VendorName "ENC" > > ModelName "L557" > > HorizSync 24.0 - 80.0 > > VertRefresh 50.0 - 75.0 > > Option "DPMS" > > EndSection > > > > Section "Device" > > Option "AGPMode" "x4" > > Option "BusType" "AGP" # [<str>] > > #Option "AGPFastWrite" "on" # [<bool>] > > #Option "AccelMethod" "EXA" # <str> > > Option "DRI" "on" # [<bool>] > > Identifier "Card0" > > Driver "radeon" > > VendorName "ATI" > > BoardName "Radeon 9200 PRO" > > BusID "PCI:1:0:0" > > EndSection > > > > Section "Screen" > > Identifier "Screen0" > > Device "Card0" > > Monitor "Monitor0" > > SubSection "Display" > > Viewport 0 0 > > Depth 1 > > EndSubSection > > SubSection "Display" > > Viewport 0 0 > > Depth 4 > > EndSubSection > > SubSection "Display" > > Viewport 0 0 > > Depth 8 > > EndSubSection > > SubSection "Display" > > Viewport 0 0 > > Depth 15 > > EndSubSection > > SubSection "Display" > > Viewport 0 0 > > Depth 16 > > EndSubSection > > SubSection "Display" > > Viewport 0 0 > > Depth 24 > > EndSubSection > > EndSection > > > > +++ dmesg +++ > > OpenBSD 4.5-stable (GENERIC) #0: Sun May 3 11:29:20 CEST 2009 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > > cpu0: AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class, 256KB L2 cache) > > 1.68 GHz > > cpu0: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > > real mem = 804810752 (767MB) > > avail mem = 769404928 (733MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 10/18/06, BIOS32 rev. 0 @ 0xfdb10, > > SMBIOS rev. 2.3 @ 0xf0630 (21 entries) > > bios0: vendor American Megatrends Inc. version "P2.80" date 10/18/2006 > > bios0: American Megatrends Inc. K7S41GX > > acpi0 at bios0: rev 0 > > acpi0: tables DSDT FACP APIC > > acpi0: wakeup devices PS2M(S4) PS2K(S4) UAR1(S4) USB1(S4) USB2(S4) EHCI(S4) > > LAN_(S4) MDM_(S4) AUD_(S4) PCI0(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: apic clock running at 268MHz > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpicpu0 at acpi0 > > acpibtn0 at acpi0: PWRB > > bios0: ROM list: 0xc0000/0xd000 0xcd000/0xa000 > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03 > > sisagp0 at pchb0 > > agp0 at sisagp0: aperture at 0xd0000000, size 0x8000000 > > ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00 > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 PRO" rev 0x01 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > radeondrm0 at vga1: apic 2 int 16 (irq 11) > > drm0 at radeondrm0 > > pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25 > > pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA, > > channel 0 wired to compatibility, channel 1 wired to compatibility > > wd0 at pciide0 channel 0 drive 0: <IBM-DTTA-350840> > > wd0: 16-sector PIO, LBA, 8063MB, 16514064 sectors > > wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00ETA0> > > wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > > wd2 at pciide0 channel 1 drive 0: <WDC WD1600JB-22GVC0> > > wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > > atapiscsi0 at pciide0 channel 1 drive 1 > > scsibus0 at atapiscsi0: 2 targets > > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H55L, 1.03> ATAPI > > 5/cdrom removable > > wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 > > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4 > > ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 20 > > (irq 5), version 1.0, legacy support > > ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 21 > > (irq 3), version 1.0, legacy support > > ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: apic 2 int 23 (irq > > 10) > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 > > sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x90: apic 2 int > > 19 (irq 5), address 00:19:66:65:10:93 > > rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1 > > trm0 at pci0 dev 9 function 0 "Tekram DC-3x5U" rev 0x01: apic 2 int 17 (irq > > 5) > > scsibus1 at trm0: 8 targets, initiator 7 > > envy0 at pci0 dev 10 function 0 "IC Ensemble Envy24 I/O Ctrlr" rev 0x02: > > apic 2 int 18 (irq 10) > > audio0 at envy0 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > midi0 at pcppi0: <PC speaker> > > spkr0 at pcppi0 > > lpt0 at isa0 port 0x378/4 irq 7 > > wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12 > > lm1 at wbsio0 port 0x290/8: W83697HF > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > > usb1 at ohci0: USB revision 1.0 > > uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 > > usb2 at ohci1: USB revision 1.0 > > uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1 > > mtrr: Pentium Pro MTRR support > > softraid0 at root > > root on wd1a swap on wd1b dump on wd1b > > radeondrm0: Setting GART location based on new memory map > > radeondrm0: writeback test failed > > radeondrm0: wait idle failed status : 0x80010140 0x00000000 > > radeondrm0: wait idle failed status : 0x80010140 0x00000000 > > radeondrm0: wait idle failed status : 0x80010140 0x00000000 > > ... > > > > -- > > Nur bis 31.05.: GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate und > > Telefonanschluss nur 17,95 Euro/mtl.!* http://portal.gmx.net/de/go/dsl02
