Hello, I am new to the OpenBSD world, so please be patient with me if I don't include all the information need. This is my first post. Thank you.
Goal: To use my Bluetooth mouse in KDE 3.5. Problem: OpenBSD 4.5-Current can see my mouse, but not pair with it. I have been following the NetBSD guide at: http://www.netbsd.org/docs/guide/en/netbsd.html#chap-bluetooth. I have installed all the ports which directly relate to bluetooth. I have been having no trouble with commands & installation until now. I keep getting this error: "" btpin: connect("/var/run/bthcid"): Socket operation on non-socket "" The command I am typing in is: #btpin -d ubt0 -a mouse -p 0000. The problem is that btpin is not located in /var/run/bthcid. Bthcid is located in /usr/local/sbin/bthcid for some reason? All the other commands in the guide work fine. I even made sure I added bthcid to my /etc/rc.config file. In addition, I always have to issue the btconfig ubt0 up command after startup everytime. Any help would be appreciated. thx. My dmesg: OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA Esther processor 1500MHz ("CentaurHauls" 686-class) 1.50 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX ,FXSR,SSE,SSE2,TM,SBF,SSE3 real mem = 1005088768 (958MB) avail mem = 963461120 (918MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/26/06, BIOS32 rev. 0 @ 0xf9ee0, SMBIOS rev. 2.3 @ 0xf0000 (33 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 09/26/2006 bios0: IDOT ID-PCM7E PC2500 apm0 at bios0: Power Management spec V1.2 (slowidle) apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd1a4 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd110/128 (6 entries) pcibios0: bad IRQ table checksum pcibios0: PCI BIOS has 7 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 5 10 11 pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x8000! 0xd8000/0x1000 cpu0 at mainbus0: (uniprocessor) cpu0: RNG AES AES-CTR SHA1 SHA256 RSA pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 viaagp0 at pchb0: v3 agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000 pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em0 at pci0 dev 8 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq 10, address 00:1b:21:1c:c0:eb rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 11, address 00:0e:2e:dc:e9:29 rlphy0 at rl0 phy 0: RTL internal PHY pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA pciide0: using irq 11 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD753LJ> wd0: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S203N, SB01> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility pciide1: channel 0 disabled (no drives) pciide1: channel 1 disabled (no drives) uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10 uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10 uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11 uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11 ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 iic0 at viapm0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-3200CL3 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-3200CL3 auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5 ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) audio0 at auvia0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 it0 at isa0 port 0x2e/2: IT8716F rev 1, EC port 0x290 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask ffed netmask ffed ttymask ffff run0 at uhub0 port 5 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2 run0: MAC/BBP RT2872 (rev 0x0202), RF RT2720 (MIMO 1T2R), address 00:02:6f:55:3c:0c uhidev0 at uhub1 port 1 configuration 1 interface 0 "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 umass0 at uhub4 port 1 configuration 1 interface 0 "Generic Mass Storage Device" rev 2.00/1.29 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct removable sd1: drive offline sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct removable sd2: drive offline sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct removable sd3: drive offline uhidev1 at uhub1 port 2 configuration 1 interface 0 "LITEON Technology USB Multimedia Keyboard" rev 1.10/1.01 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 ubt0 at uhub4 port 2 "Cambridge Silicon Radio Bluetooth" rev 2.00/31.64 addr 3 softraid0 at root root on wd0a swap on wd0b dump on wd0b bthub0 at ubt0 00:0a:94:02:a3:0e bthidev0 at bthub0 00:0f:f6:6d:66:41 auth btms0 at bthidev0 reportid 2: 3 buttons, W and Z dirs. wsmouse1 at btms0 mux 0 bthidev0: reportid 3 not configured bthidev0: disconnected
