ifconfig em0 up
On Tue, Aug 25, 2009 at 03:37:55PM +0100, FRLinux wrote:
> Hello,
>
> I am trying to replicate some traffic from a Cisco 6500 onto an
> OpenBSD 4.5 vanilla machine. I have two NICs, rl0 which is the
> administration interface and em0 which I hope to use for the ethernet
> tap. So far, my cisco replicates traffic happily, i can see the packet
> count in/egress increasing but nothing seems to reach em0.
>
> I have no PF running, the box is inside the network with a cable
> connected straight from em0 to a cisco port on the 6500. The cisco
> router reports the link live (so does OpenBSD) but no traffic seems to
> be flowing.
>
> I realize that has to be something stupid but if anyone could send me
> a pointer, that would be most welcome.
>
> em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr xx:xx:xx:xx:xx
> priority: 0
> media: Ethernet autoselect (1000baseT full-duplex,rxpause)
> status: active
>
> OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.22 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 1073246208 (1023MB)
> avail mem = 1029500928 (981MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/19/04, BIOS32 rev. 0 @
> 0xfb1a0, SMBIOS rev. 2.3 @ 0xf0120 (49 entries)
> bios0: vendor Award Software International, Inc. version "F5" date 01/19/2004
> bios0: NEC Computers International 00000000000000000000000
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP APIC
> acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) AMR0(S4) UAR1(S4)
> UAR2(S4) PCI0(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 200MHz
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 14, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0
> acpibtn0 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000! 0xd0000/0x1800 0xd2000/0x1000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "SiS 648 PCI" rev 0x51
> sisagp0 at pchb0
> agp0 at sisagp0: aperture at 0xe0000000, size 0x8000000
> ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
> pci1 at ppb0 bus 1
> pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x14
> "SiS 7007 FireWire" rev 0x00 at pci0 dev 2 function 3 not configured
> pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 648: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> pciide0: channel 0 disabled (no drives)
> wd0 at pciide0 channel 1 drive 0: <SAMSUNG SP2014N>
> wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
> wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 2 int
> 18 (irq 9), SiS7012 AC97
> ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
> audio0 at auich0
> ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2
> int 20 (irq 5), version 1.0, legacy support
> ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2
> int 21 (irq 10), version 1.0, legacy support
> ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: apic 2
> int 22 (irq 11), version 1.0, legacy support
> ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 2 int 23 (irq 6)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
> vga1 at pci0 dev 9 function 0 "S3 Trio32/64" rev 0x54
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> em0 at pci0 dev 11 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02:
> apic 2 int 19 (irq 10), address 00:07:e9:39:50:d5
> rl0 at pci0 dev 15 function 0 "Realtek 8139" rev 0x10: apic 2 int 16
> (irq 11), address 00:0d:61:1b:69:27
> rlphy0 at rl0 phy 0: RTL internal PHY
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> it0 at isa0 port 0x2e/2: IT8705F rev 2, EC port 0x290
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> usb3 at ohci2: USB revision 1.0
> uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Sun Microsystems
> Type 6 Keyboard" rev 1.10/2.00 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
>
> Cheers,
> Steph
