Hello,
I am trying to replicate some traffic from a Cisco 6500 onto an
OpenBSD 4.5 vanilla machine. I have two NICs, rl0 which is the
administration interface and em0 which I hope to use for the ethernet
tap. So far, my cisco replicates traffic happily, i can see the packet
count in/egress increasing but nothing seems to reach em0.
I have no PF running, the box is inside the network with a cable
connected straight from em0 to a cisco port on the 6500. The cisco
router reports the link live (so does OpenBSD) but no traffic seems to
be flowing.
I realize that has to be something stupid but if anyone could send me
a pointer, that would be most welcome.
em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr xx:xx:xx:xx:xx
priority: 0
media: Ethernet autoselect (1000baseT full-duplex,rxpause)
status: active
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.22 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1073246208 (1023MB)
avail mem = 1029500928 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/19/04, BIOS32 rev. 0 @
0xfb1a0, SMBIOS rev. 2.3 @ 0xf0120 (49 entries)
bios0: vendor Award Software International, Inc. version "F5" date 01/19/2004
bios0: NEC Computers International 00000000000000000000000
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) AMR0(S4) UAR1(S4)
UAR2(S4) PCI0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 14, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000! 0xd0000/0x1800 0xd2000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 648 PCI" rev 0x51
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x14
"SiS 7007 FireWire" rev 0x00 at pci0 dev 2 function 3 not configured
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 648: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <SAMSUNG SP2014N>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 2 int
18 (irq 9), SiS7012 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2
int 20 (irq 5), version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2
int 21 (irq 10), version 1.0, legacy support
ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: apic 2
int 22 (irq 11), version 1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 2 int 23 (irq 6)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 9 function 0 "S3 Trio32/64" rev 0x54
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 11 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02:
apic 2 int 19 (irq 10), address 00:07:e9:39:50:d5
rl0 at pci0 dev 15 function 0 "Realtek 8139" rev 0x10: apic 2 int 16
(irq 11), address 00:0d:61:1b:69:27
rlphy0 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8705F rev 2, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.10/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Cheers,
Steph
