Is there a way to get scsi output data similar to 'atactl device identify'
output?
# atactl /dev/rwd0c identify
Model: Kingston SSDNow V Series 64GB, Rev: B090522a, Serial #: 06J990030232
Device type: ATA, fixed
Cylinders: 16383, heads: 16, sec/track: 63, total sectors: 125045424
Device capabilities:
ATA standby timer values
IORDY operation
IORDY disabling
Device supports the following standards:
ATA-4 ATA-5 ATA-6 ATA-7
Master password revision code 0xfffe
Device supports the following command sets:
READ BUFFER command
WRITE BUFFER command
Write cache
Power Management feature set
Security Mode feature set
SMART feature set
Flush Cache command
Device has enabled the following command sets/features:
READ BUFFER command
WRITE BUFFER command
Write cache
Power Management feature set
SMART feature set
Flush Cache command
Reading the scsi manpage, the inquiry command: scsi -f /dev/rsd2c -c "12 0 0 0
64 0" -i 0x64 "s8 z8 z16 z4" outputs the name of the controller "DELL PERC 5/i
1.03" but no info about the drives connected to it.
Brad
