Ken wrote:
> As a general note, the source tree is going to be locked in the
> near future for 4.7. There has been a major re-write of the SCSI
> layer internals, and many device drivers were touched. TEST NOW!
>
> Test anything that produces sd, cd, st, etc. devices. All hardware
> and all weird-ass i/o situations. TEST NOW!
Hi,
I have an ATAPI LS-120 drive, 4.4/4.5 just showed "drive offline", but
4.6+ prints disk geometry (..if any) during boot.
OpenBSD 4.6-current (GENERIC) #509: Fri Jan 15 14:48:04 MST 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
...
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <MATSHITA, LS-120 VER5 00, F527> ATAPI
0/direct removable
-sd0: 1MB, 512 bytes/sec, 2880 sec total
+sd0: drive offline
sd0(pciide0:1:0): using PIO mode 0, DMA mode 1
...
+sd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x1b
+ SENSE KEY: Not Ready
+ ASC/ASCQ: Medium Not Present
I'm greeted by this SCSI message with 4.7, only shows up once though.
So far, everything's great. :-)
-Bryan.
