Kenneth R Westerback wrote:
> Being in Australia and confused about what day it is, I should be
> more precise. Make sure the trees you generate test kernels from
> have r1.166 or greater of scsi_base.c. That was the last commit
> from n2k10.
>
> And I think that particular diff should fix the Check Condition
> error. If not please let me know.
>
> .... Ken
Hi Ken,
The SCSI message remains in the January 23rd snapshot.
-Bryan.
---
>> OpenBSD/i386 BOOT 3.02
boot> boot bsd47 -s
booting hd0a:bsd47: 6811516+1055144 [52+355456+338488]=0x82a184
entry point at 0x200120
[ using 694368 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.6-current (GENERIC) #511: Wed Jan 20 06:46:42 MST 2010
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 598 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 133775360 (127MB)
avail mem = 121040896 (115MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/30/99, BIOS32 rev. 0 @ 0xfd790,
SMBIOS rev. 2.1 @ 0xefac0 (49 entries)
bios0: vendor Intel Corp. version "4M4PB0X1.15A.0033.P21" date 11/30/1999
bios0: Gateway E-4200
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP
acpi0: wakeup devices PCI0(S1) USB0(S1) UAR1(S1) UAR2(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3, C2
acpipwrres0 at acpi0: PFAN
bios0: ROM list: 0xe4000/0xc000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLP LM30>
wd0: 16-sector PIO, LBA, 28629MB, 58633344 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <MATSHITA, LS-120 VER5 00, F527> ATAPI
0/direct removable
sd0: drive offline
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LG, CD-ROM CRD-8483B, 1.02> ATAPI 5/cdrom
removable
sd0(pciide0:1:0): using PIO mode 0, DMA mode 1
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
lmenv0 at iic0 addr 0x2d: adm9240 rev 2, starting scan
spdmem0 at iic0 addr 0x50: 128MB SDRAM ECC PC100CL2
xl0 at pci0 dev 15 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 10,
address 00:01:02:72:87:71
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 7
vr0 at pci0 dev 16 function 0 "VIA Rhine/RhineII" rev 0x06: irq 9,
address 00:50:ba:bd:89:4d
amphy0 at vr0 phy 8: Am79C873 10/100 PHY, rev. 0
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask fbef netmask ffef ttymask ffff
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
sd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x1b
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
root on wd0a swap on wd0b dump on wd0b
Enter pathname of shell or RETURN for sh:
