On Thu, Jun 03, 2010 at 05:53:41PM +0200, Christopher Zimmermann wrote: > On 06/03/10 17:25, Otto Moerbeek wrote: > > On Thu, Jun 03, 2010 at 04:46:27PM +0200, Christopher Zimmermann wrote: > > > >> Hello, > >> > >> today I upgraded my system to the latest snapshot from some -current > >> version end of april. > >> > >> Now in all gtk application my mouse cursor often jumps to the upper > >> and/or left edge of the screen (not of the application window). > >> I already recompiled gtk+2 and some of the gtk2 applications, but it > >> did not help. > >> > >> Does anyone else have a similar experience? Any ides? The only idea > >> I have is reinstalling the whole system :( > >> > >> > >> Christopher > > > > a dmesg, my kingdom for a dmesg... > > Here's my dmesg, where's your kingdom? ;)
Are you running an amd64 kernel? Sigh, I wish people would not change these things and use the standard compilation setup which allows us to see which arch you are running. -Otto > > > OpenBSD 4.7-current (sys) #0: Wed Jun 2 17:04:24 CEST 2010 > madro...@pundit:/var/obj/sys > real mem = 1071841280 (1022MB) > avail mem = 1029640192 (981MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf04b0 (57 entries) > bios0: vendor American Megatrends Inc. version "0603" date 03/31/2006 > bios0: ASUSTeK Computer INC. K8S-MV-P > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP APIC OEMB > acpi0: wakeup devices PS2K(S4) PS2M(S4) EUSB(S4) USB_(S4) USB2(S4) > USB3(S4) AC97(S4) MC97(S4) PCI1(S4) PCI2(S4) MAC_(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Sempron(tm) Processor 3000+, 1795.71 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, > 128KB 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: AMD erratum 89 present, BIOS upgrade may be required > cpu0: apic clock running at 199MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 14, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus 2 (P0P6) > acpiprt3 at acpi0: bus 3 (P0P7) > acpicpu0 at acpi0: PSS > aibs0 at acpi0 > acpibtn0 at acpi0: PWRB > cpu0: Cool'n'Quiet K8 1795 MHz: speeds: 1800 1000 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "SiS 760 PCI" rev 0x03 > agp at pchb0 not configured > ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pcib0 at pci0 dev 2 function 0 "SiS 965 ISA" rev 0x48 > pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 760: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> > ATAPI 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 1 int > 18 (irq 11), SiS7012 AC97 > ac97: codec id 0x41445368 (Analog Devices AD1888) > ac97: codec features headphone, 20 bit DAC, No 3D Stereo > audio0 at auich0 > ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 1 > int 20 (irq 5), version 1.0, legacy support > ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 1 > int 21 (irq 10), version 1.0, legacy support > ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: apic 1 > int 22 (irq 5), version 1.0, legacy support > ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 1 int > 23 (irq 10) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 > se0 at pci0 dev 4 function 0 "SiS 190" rev 0x00: apic 1 int 19 (irq > 5), address 00:15:f2:64:0c:83 > rlphy0 at se0 phy 1: RTL8201L 10/100 PHY, rev. 1 > pciide1 at pci0 dev 5 function 0 "SiS 182 SATA" rev 0x01: DMA > pciide1: using apic 1 int 17 (irq 10) for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <SAMSUNG SP2504C> > wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > ppb1 at pci0 dev 6 function 0 "SiS PCI-PCI" rev 0x00 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 7 function 0 "SiS PCI-PCI" rev 0x00 > pci3 at ppb2 bus 3 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x54 > lm1 at wbsio0 port 0x290/8: W83627EHF-A > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub1 port 2 configuration 1 interface 0 "Sun > Microsystems Type 6 Keyboard" rev 1.10/2.00 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33 > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub3 port 1 configuration 1 interface 0 "Logitech USB > Optical Mouse" rev 2.00/43.01 addr 2 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > root on wd0a swap on wd0b dump on wd0b