Hello m...@.
I'm complete out of insights with my Eaton NV 2000 which is supported
(http://www.networkupstools.org/compat/stable.html) by megatec_usb
driver.
$ dmesg | egrep -i "generic|ugen"
OpenBSD 4.7-beta (GENERIC.MP) #82: Fri Feb 5 01:05:44 MST 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
ugen0 at uhub4 port 2 "Cypress Semiconductor USB to Serial" rev 1.10/0.02 addr 2
$ usbdevs -v | egrep -i "cypress"
port 2 addr 2: low speed, power 100 mA, config 1, USB to
Serial(0x5161), Cypress Semiconductor(0x0665), rev 0.02
$ cat /etc/nut/ups.conf
[eaton]
driver = megatec_usb
port = /dev/ugen0.00
vendorid = 0665
productid = 5161
$ ls -l /dev/ugen0*
crw-rw-rw- 1 root daemon 63, 0 Feb 11 13:58 /dev/ugen0.00
crw-rw-rw- 1 root daemon 63, 1 Feb 11 13:58 /dev/ugen0.01
crw-rw-rw- 1 root daemon 63, 2 Feb 11 13:58 /dev/ugen0.02
crw-rw-rw- 1 root daemon 63, 3 Feb 11 13:58 /dev/ugen0.03
crw-rw-rw- 1 root daemon 63, 4 Feb 11 13:58 /dev/ugen0.04
crw-rw-rw- 1 root daemon 63, 5 Feb 11 13:58 /dev/ugen0.05
crw-rw-rw- 1 root daemon 63, 6 Feb 11 13:58 /dev/ugen0.06
crw-rw-rw- 1 root daemon 63, 7 Feb 11 13:58 /dev/ugen0.07
crw-rw-rw- 1 root daemon 63, 8 Feb 11 13:58 /dev/ugen0.08
crw-rw-rw- 1 root daemon 63, 9 Feb 11 13:58 /dev/ugen0.09
crw-rw-rw- 1 root daemon 63, 10 Feb 11 13:58 /dev/ugen0.10
crw-rw-rw- 1 root daemon 63, 11 Feb 11 13:58 /dev/ugen0.11
crw-rw-rw- 1 root daemon 63, 12 Feb 11 13:58 /dev/ugen0.12
crw-rw-rw- 1 root daemon 63, 13 Feb 11 13:58 /dev/ugen0.13
crw-rw-rw- 1 root daemon 63, 14 Feb 11 13:58 /dev/ugen0.14
crw-rw-rw- 1 root daemon 63, 15 Feb 11 13:58 /dev/ugen0.15
$ pkg_info | egrep -i "nut|usb"
libusb-0.1.12 USB access library
nut-2.4.3 UPS monitoring program supporting many brands
# megatec_usb -a eaton -DDD
Network UPS Tools - Megatec protocol driver 1.6 (2.4.3)
Serial-over-USB transport layer 0.10
0.000000 debug level is '3'
0.000454 No appropriate HID device found
0.000494 No supported devices found. Please check your device
availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<[email protected]>.
Also, I have tried "port" values of "auto" and from "/dev/ugen0.00" to
"/dev/ugen0.15" and "subdriver" values of "krauler", "agiler",
"agiler-old" and "phoenix" with no effect.
Any help will be very welcome. Thanks.
Alexey
