david carrasco <[email protected]> wrote:
> answer your question,
> i believe the problern is static routing setting on all
> cable is okey
> please help, with set up static client,gateway, and router (dsl ext)
>
> On gateway start "tcpdump -i xl1
> ************************************************************************
> gateway.my.domain (192.168.0.1) at 00:60:97:be:ca:2a on xl1 static
> ? (192.168.1.1) at 00:1d:0f:fc:95:de on xl0
> *************************************************************************
>
>
> then on client start "ping
> > 192.168.0.1". Do you see the packets?
> /////////////////////////////////////////////////////////////////////////////////////////////////////////////
> --- 192.168.0.1 ping statistics ---
> 3 packets transmitted, 0 packets received, 100.0% packet loss
> ///////////////////////////////////////////////////////////////////////////////////////////////////////////////
>
>
> After you stop the ping run "arp -a" on both client and gateway.
> > Do you see an entry for the other host?
> in gateway
> ****************************************************
> gateway.my.domain (192.168.0.1) at 00:60:97:be:ca:2a on xl1 static
> ? (192.168.1.1) at 00:1d:0f:fc:95:de on xl0
> ****************************************************
>
>
> in client
> ///////////////////////////////////////////////////////////////////////////////
> nothing out screen
> ///////////////////////////////////////////////////////////////////////////////
I am having a hard time following what you are saying.
On the gateway run "ping 192.168.0.10" when you stop that run
"arp -a" in the output you should see one of thease lines:
This one means your layer 2 such as cable is broken.
? (192.168.0.10) at (incomplete) on xl1
This one means your layer 3 such as packet filter is broken.
? (192.168.0.10) at 00:0c:76:bb:00:5a on xl1
But as another subscriber noted:
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet autoselect (none)
status: no carrier
and
xl1: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet autoselect (none)
status: no carrier
which means neither your gateway or your client has a working
cable.
Are you using a switch or are these machines connected to each
other with a direct cable? If you are using a direct cable you
will need a crossover cable as 100baseTX does not support auto
MDI/MDI-X.
