What about the output of "misdnportinfo" ? from the dmesg output it looks like the cards is initialized correctly.
Oscar Garcia wrote: >Hi Kai, > >Thanks for your help > >Here is the outpout of dmesg > >Oscar > > > > > >------------------------------------------------------------------------ > >Linux version 2.6.9-34.ELsmp ([EMAIL PROTECTED]) (gcc version 3.4.5 20051201 >(Red Hat 3.4.5-2)) #1 SMP Wed Mar 8 00:27:03 CST 2006 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) > BIOS-e820: 000000001fff0000 - 000000001fffe000 (ACPI data) > BIOS-e820: 000000001fffe000 - 0000000020000000 (ACPI NVS) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) >0MB HIGHMEM available. >511MB LOWMEM available. >found SMP MP-table at 000ff780 >NX (Execute Disable) protection: active >On node 0 totalpages: 131056 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 126960 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 >DMI 2.3 present. >Using APIC driver default >ACPI: RSDP (v002 ACPIAM ) @ 0x000fab00 >ACPI: XSDT (v001 HP OEMXSDT 0x02000613 MSFT 0x00000097) @ 0x1fff0100 >ACPI: FADT (v003 HP OEMFACP 0x02000613 MSFT 0x00000097) @ 0x1fff0290 >ACPI: MADT (v001 HP OEMAPIC 0x02000613 MSFT 0x00000097) @ 0x1fff0390 >ACPI: MCFG (v001 HP OEMMCFG 0x02000613 MSFT 0x00000097) @ 0x1fff0460 >ACPI: OEMB (v001 HP HP_OEM 0x02000613 MSFT 0x00000097) @ 0x1fffe040 >ACPI: DSDT (v001 HP CPQO6120 0x00000120 INTL 0x02002026) @ 0x00000000 >ACPI: PM-Timer IO Port: 0x808 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >Processor #0 15:4 APIC version 20 >ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >Processor #1 15:4 APIC version 20 >ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) >ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) >ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0xa]) >ACPI: NMI not connected to LINT 1! >Enabling APIC mode: Flat. Using 0 I/O APICs >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Using ACPI (MADT) for SMP configuration information >Built 1 zonelists >Kernel command line: ro root=LABEL=/1 >Initializing CPU#0 >CPU 0 irqstacks, hard=c03ea000 soft=c03ca000 >PID hash table entries: 2048 (order: 11, 32768 bytes) >Detected 3000.806 MHz processor. >Using tsc for high-res timesource >Console: colour VGA+ 80x25 >Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >Memory: 513644k/524224k available (1868k kernel code, 10008k reserved, 755k >data, 180k init, 0k highmem) >Calibrating delay using timer specific routine.. 6006.81 BogoMIPS (lpj=3003405) >Security Scaffold v1.0.0 initialized >SELinux: Initializing. >SELinux: Starting in permissive mode >There is already a security framework initialized, register_security failed. >selinux_register_security: Registering secondary module capability >Capability LSM initialized as secondary >Mount-cache hash table entries: 512 (order: 0, 4096 bytes) >CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 >monitor/mwait feature present. >using mwait in idle threads. >CPU: Trace cache: 12K uops, L1 D cache: 16K >CPU: L2 cache: 2048K >CPU0: Initial APIC ID: 0, Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU0: Intel P4/Xeon Extended MCE MSRs (24) available >CPU0: Thermal monitoring enabled >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Checking 'hlt' instruction... OK. >CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 >per-CPU timeslice cutoff: 1761.60 usecs. >task migration cache decay timeout: 2 msecs. >Booting processor 1/1 eip 3000 >CPU 1 irqstacks, hard=c03eb000 soft=c03cb000 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 5999.38 BogoMIPS (lpj=2999693) >CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 >monitor/mwait feature present. >CPU: Trace cache: 12K uops, L1 D cache: 16K >CPU: L2 cache: 2048K >CPU1: Initial APIC ID: 1, Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#1. >CPU1: Intel P4/Xeon Extended MCE MSRs (24) available >CPU1: Thermal monitoring enabled >CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 >Total of 2 processors activated (12006.19 BogoMIPS). >ENABLING IO-APIC IRQs >..TIMER: vector=0x31 pin1=2 pin2=-1 >checking TSC synchronization across 2 CPUs: >CPU#0 had -1074793 usecs TSC skew, fixed it up. >CPU#1 had 0 usecs TSC skew, fixed it up. >Brought up 2 CPUs >zapping low mappings. >checking if image is initramfs... it is >Freeing initrd memory: 475k freed >NET: Registered protocol family 16 >PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8 >PCI: Using MMCONFIG >mtrr: v2.0 (20020519) >ACPI: Subsystem revision 20040816 >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (00:00) >PCI: Probing PCI hardware (bus 00) >PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 >PCI: Transparent bridge - 0000:00:1e.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) >Linux Plug and Play Support v0.97 (c) Adam Belay >usbcore: registered new driver usbfs >usbcore: registered new driver hub >PCI: Using ACPI for IRQ routing >ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 >ACPI: PCI interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 >ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185 >ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 >ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 >ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185 >ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201 >ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193 >ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 17 (level, low) -> IRQ 177 >ACPI: PCI interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 169 >ACPI: PCI interrupt 0000:08:02.0[A] -> GSI 16 (level, low) -> IRQ 169 >apm: BIOS not found. >audit: initializing netlink socket (disabled) >audit(1159268469.893:1): initialized >Total HugeTLB memory allocated, 0 >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >SELinux: Registering netfilter hooks >Initializing Cryptographic API >ksign: Installing public key data >Loading keyring >- Added public key B4802E7A21D4FA03 >- User ID: CentOS (Kernel Module GPG key) >pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >ACPI: Processor [CPU1] (supports C1) >ACPI: Processor [CPU2] (supports C1) >Real Time Clock Driver v1.12 >Linux agpgart interface v0.100 (c) Dave Jones >serio: i8042 AUX port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled >ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize >divert: not allocating divert_blk for non-ethernet device lo >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >ICH7: IDE controller at PCI slot 0000:00:1f.1 >ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201 >ICH7: chipset revision 1 >ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio >Probing IDE interface ide0... >hda: TSSTcorp CDW/DVD TS-H492C, ATAPI CD/DVD-ROM drive >Using cfq io scheduler >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >Probing IDE interface ide1... >Probing IDE interface ide2... >Probing IDE interface ide3... >Probing IDE interface ide4... >Probing IDE interface ide5... >hda: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) >Uniform CD-ROM driver Revision: 3.20 >ide-floppy driver 0.99.newide >usbcore: registered new driver hiddev >usbcore: registered new driver usbhid >drivers/usb/input/hid-core.c: v2.0:USB HID core driver >mice: PS/2 mouse device common for all mice >input: AT Translated Set 2 keyboard on isa0060/serio0 >md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 >NET: Registered protocol family 2 >IP: routing cache hash table of 2048 buckets, 32Kbytes >TCP: Hash tables configured (established 16384 bind 21845) >Initializing IPsec netlink socket >NET: Registered protocol family 1 >NET: Registered protocol family 17 >ACPI: (supports S0 S4 S5) >ACPI wakeup devices: >P0P2 P0P1 USB0 USB1 USB2 USB3 EUSB MC97 P0P4 P0P5 P0P6 P0P7 P0P8 P0P9 >Freeing unused kernel memory: 180k freed >SCSI subsystem initialized >libata version 1.20 loaded. >ata_piix 0000:00:1f.2: version 1.05 >ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193 >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >ata1: SATA max UDMA/133 cmd 0xD480 ctl 0xD402 bmdma 0xCC00 irq 193 >ata2: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xCC08 irq 193 >ata1: dev 0 cfg 49:2f00 82:7869 83:7d09 84:4633 85:7849 86:3c01 87:4623 88:203f >ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48 >ata1: dev 0 configured for UDMA/100 >scsi0 : ata_piix >ATA: abnormal status 0x7F on port 0xD087 >ata2: disabling port >scsi1 : ata_piix > Vendor: ATA Model: Maxtor 6L080M0 Rev: BACE > Type: Direct-Access ANSI SCSI revision: 05 >SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) >SCSI device sda: drive cache: write through >SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) >SCSI device sda: drive cache: write through > sda: sda1 sda2 sda3 >Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >SELinux: Disabled at runtime. >SELinux: Unregistering netfilter hooks >inserting floppy driver for 2.6.9-34.ELsmp >Floppy drive(s): fd0 is 1.44M >floppy0: no floppy controllers found >tg3.c:v3.43-rh (Oct 24, 2005) >ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 17 (level, low) -> IRQ 177 >PCI: Setting latency timer of device 0000:07:00.0 to 64 >divert: allocating divert_blk for eth0 >eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) >10/100/1000BaseT Ethernet 00:16:35:01:ef:b0 >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] >eth0: dma_rwctrl[76180000] >hw_random: RNG not detected >Evaluate _OSC Set fails. Status = 0x0005 >pciehp: Both _OSC and OSHP methods do not exist >Evaluate _OSC Set fails. Status = 0x0005 >pciehp: Both _OSC and OSHP methods do not exist >ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185 >ehci_hcd 0000:00:1d.7: EHCI Host Controller >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >ehci_hcd 0000:00:1d.7: irq 185, pci mem e0806c00 >ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 >PCI: cache line size of 128 is not supported by device 0000:00:1d.7 >ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 6 ports detected >USB Universal Host Controller Interface driver v2.2 >ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185 >uhci_hcd 0000:00:1d.0: UHCI Host Controller >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >uhci_hcd 0000:00:1d.0: irq 185, io base 0000dc00 >uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 >uhci_hcd 0000:00:1d.1: UHCI Host Controller >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >uhci_hcd 0000:00:1d.1: irq 193, io base 0000d880 >uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 >uhci_hcd 0000:00:1d.2: UHCI Host Controller >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >uhci_hcd 0000:00:1d.2: irq 201, io base 0000d800 >uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >md: Autodetecting RAID arrays. >md: autorun ... >md: ... autorun DONE. >ACPI: Power Button (FF) [PWRF] >EXT3 FS on sda2, internal journal >device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [EMAIL PROTECTED] >cdrom: open failed. >kjournald starting. Commit interval 5 seconds >EXT3 FS on sda1, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >Adding 779144k swap on /dev/sda3. Priority:-1 extents:1 >IA-32 Microcode Update Driver: v1.14 <[EMAIL PROTECTED]> >microcode: CPU0 already at revision 0x5 (current=0x5) >microcode: CPU1 already at revision 0x5 (current=0x5) >microcode: No new microdata for cpu 1 >microcode: No new microdata for cpu 0 >IA-32 Microcode Update Driver v1.14 unregistered >parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] >parport0: irq 7 detected >Modular ISDN Stack core $Revision: 1.37 $ >mISDNd: kernel daemon started (current:def637b0) >mISDNd: test event done >mISDN: HFC-multi driver Rev. 1.54 >HFC-MULTI: Card 'HFC-2S Beronet Card' found, but not given by module's >options, ignoring... >0 devices registered >HFC Before unregistering from PCI >HFC PCI card Unregistered from PCI >mISDNd: daemon exit now (current:def637b0) >mISDNcore unloaded >ip_tables: (C) 2000-2002 Netfilter core team >ip_tables: (C) 2000-2002 Netfilter core team >tg3: eth0: Link is up at 100 Mbps, full duplex. >tg3: eth0: Flow control is on for TX and on for RX. >i2c /dev entries driver >NET: Registered protocol family 10 >Disabled Privacy Extensions on device c0342040(lo) >IPv6 over IPv4 tunneling driver >divert: not allocating divert_blk for non-ethernet device sit0 >eth0: no IPv6 routers present >CAPI Subsystem Rev 1.1.2.8 >capifs: Rev 1.1.2.3 >capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) >Modular ISDN Stack core $Revision: 1.37 $ >mISDNd: kernel daemon started (current:d64f79b0) >mISDNd: test event done >ISDN L1 driver version 1.17 >ISDN L2 driver version 1.30 >mISDN: DSS1 Rev. 1.40 >mISDN Capi 2.0 driver file version 1.20 >mISDN: HFC-multi driver Rev. 1.54 >HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-2S Beronet >Card' clock: double >ACPI: PCI interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 169 >HFC-2S#1: defined at IOBASE 0xec00 IRQ 169 HZ 1000 leds-type 3 >HFC_multi: resetting HFC with chip ID=0xc revision=1 >hfcpci_probe: DIPs(0x8f) jumpers(0x0) >mISDNStackd started for id(00000100) >mISDNStackd started for id(10010100) >mISDNStackd started for id(10020100) >layer2: Windowsize 1 >l1_manager prim f1482 not handled >mISDNStackd started for id(00000200) >mISDNStackd started for id(10010200) >mISDNStackd started for id(10020200) >layer2: Windowsize 1 >l1_manager prim f1482 not handled >1 devices registered >mISDN_dsp: Audio DSP Rev. 1.24 (debug=0x0) EchoCancellor MG2 dtmftreshold(100) >mISDN_dsp: DSP clocks every 128 samples. This equals 16 jiffies. > > >------------------------------------------------------------------------ > >_______________________________________________ >Misdn-asterisk mailing list >[email protected] >http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk > > _______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
