ldd /usr/local/bin/mixxx libportaudio.so.2 => /usr/lib/libportaudio.so.2 (0xb7d79000)
On Dec 9, 2007 2:43 PM, Adam Davison <[EMAIL PROTECTED]> wrote: > Try doing an ldd on mixxx just to make sure it's resolving to > /usr/lib/libportaudio.so.2 as well. > > 1.5.0 was linked statically with portaudio because most distributions > weren't packaging v19 at the time and came with a mixxx and > mixxx-with-jack binary. That was a lot of "by hand" fiddling though > and was never part of our build scripts as far as I know so building > from cvs now should be fine. > > Adam > > > On 09/12/2007, Arve Knudsen <[EMAIL PROTECTED]> wrote: > > On Sun, 09 Dec 2007 20:37:04 +0100, Jason Schaefer > > <[EMAIL PROTECTED]> wrote: > > > > > ok, thats solved: > > > [EMAIL PROTECTED]:/usr/src/portaudio# ldd /usr/lib/libportaudio.so.2 > > > linux-gate.so.1 => (0xffffe000) > > > libasound.so.2 => /usr/lib/libasound.so.2 (0xb7ec1000) > > > libjack.so.0 => /usr/lib/libjack.so.0 (0xb7ea8000) > > > librt.so.1 => /lib/tls/i686/cmov/librt.so.1 (0xb7e9e000) > > > libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb7e79000) > > > libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 > > > (0xb7e61000) > > > libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7d17000) > > > libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0xb7d13000) > > > /lib/ld-linux.so.2 (0x80000000) > > > > > > mixxx and jack are still not able to work together. More output of > > > mixxx: > > > > I see that PA is still not trying to use JACK. Do you know if Mixxx is > > statically linked with PA? If so, it will use a previously compiled > > version of PA (probably without JACK). To verify that PA really is able to > > use JACK, you can compile it with only JACK support and try one of the > > test programs, for instance bin/patest_sine. If this works, you may have > > to recompile Mixxx. > > > > Arve > > > > > [EMAIL PROTECTED]:~$ mixxx > > > Debug: Starting up... > > > Debug: Using LoFi EQs > > > Debug: Using LoFi EQs > > > Debug: SoundManager::SoundManager() > > > Debug: SampleRate 44100 > > > Debug: Latency 64 > > > before paHostApiInitializers[0]. > > > QueryDirection: Device /dev/dsp busy > > > QueryDirection: Device /dev/dsp busy > > > PaOSS BuildDeviceList: Total number of devices found: 0 > > > after paHostApiInitializers[0]. > > > before paHostApiInitializers[1]. > > > BuildDeviceList: Ignoring ALSA plugin device cards of type unknown > > > BuildDeviceList: Found plugin default of type unknown > > > BuildDeviceList: Found plugin front of type unknown > > > BuildDeviceList: Found plugin rear of type unknown > > > BuildDeviceList: Found plugin center_lfe of type unknown > > > BuildDeviceList: Found plugin side of type unknown > > > BuildDeviceList: Found plugin surround40 of type unknown > > > BuildDeviceList: Found plugin surround41 of type unknown > > > BuildDeviceList: Found plugin surround50 of type unknown > > > BuildDeviceList: Found plugin surround51 of type unknown > > > BuildDeviceList: Found plugin surround71 of type unknown > > > BuildDeviceList: Found plugin iec958 of type unknown > > > BuildDeviceList: Found plugin spdif of type unknown > > > BuildDeviceList: Found plugin dmix of type unknown > > > BuildDeviceList: Ignoring ALSA plugin device dsnoop of type unknown > > > BuildDeviceList: Found plugin modem of type unknown > > > BuildDeviceList: Found plugin phoneline of type unknown > > > BuildDeviceList: Ignoring ALSA plugin device hw of type hw > > > BuildDeviceList: Ignoring ALSA plugin device plughw of type plug > > > BuildDeviceList: Ignoring ALSA plugin device plug of type plug > > > BuildDeviceList: Ignoring ALSA plugin device shm of type shm > > > BuildDeviceList: Ignoring ALSA plugin device tee of type file > > > BuildDeviceList: Ignoring ALSA plugin device file of type file > > > BuildDeviceList: Ignoring ALSA plugin device null of type null > > > OpenPcm: Failed to open busy device 'hw:0,0' > > > OpenPcm: Failed to open busy device 'hw:0,0' > > > Default input device: Intel 82801BA-ICH2: Intel 82801BA-ICH2 - MIC ADC > > > (hw:0,1) > > > FillInDevInfo: Adding device Intel 82801BA-ICH2: Intel 82801BA-ICH2 - > > > MIC ADC (hw:0,1): 0 > > > OpenPcm: Failed to open busy device 'front' > > > OpenPcm: Failed to open busy device 'surround40' > > > OpenPcm: Failed to open busy device 'surround41' > > > OpenPcm: Failed to open busy device 'surround50' > > > OpenPcm: Failed to open busy device 'surround51' > > > OpenPcm: Failed to open busy device 'iec958' > > > OpenPcm: Failed to open busy device 'spdif' > > > OpenPcm: Failed to open busy device 'spdif' > > > OpenPcm: Failed to open busy device 'default' > > > OpenPcm: Failed to open busy device 'default' > > > OpenPcm: Failed to open busy device 'dmix' > > > BuildDeviceList: Building device list took 0.169148 seconds > > > after paHostApiInitializers[1]. > > > Debug: SoundManager::queryDevices() > > > Debug: SoundManager::clearDeviceList() > > > Debug: SoundManager::closeDevices() > > > Debug: type signal > > > Debug: type marks > > > Debug: type signal > > > Debug: type marks > > > Debug: Track::readXML "/home/jason/.mixxxtrack.xml" > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: Track exists... > > > Debug: playlist name Play Queue > > > Debug: playlist name Library > > > Debug: Track exists... > > > Debug: Starting Library Scanner... > > > Debug: Add track "/home/jason/music/OutKast - Speakerboxxx/OutKast - > > > Speakerboxxx - 01 - Intro.ogg" > > > Debug: Add track "/home/jason/music/OutKast - Speakerboxxx/OutKast - > > > Speakerboxxx - 02 - Ghetto Musick Feat Andr 3000.ogg" > > > Debug: selectedAPI is: "ALSA" > > > Debug: SoundManager::getDeviceList > > > Debug: SoundManager::getDeviceList > > > Debug: SoundManager::getDeviceList > > > Debug: Warning: Creation of the midi queue failed. Operation not > > > permitted > > > Debug: Midi Sequencer: unknown event > > > Debug: Midi Sequencer: unknown event > > > Debug: PowerMate: write(): Bad file descriptor > > > Debug: PowerMate: write(): Bad file descriptor > > > Debug: m_pHercules init: 0x83df778 > > > Debug: Midi OK (Workaround not required) > > > Debug: setupMappings( > > > "/usr/local/share/mixxx/midi/Evolution_Xsession.midi.xml" ) > > > Debug: SoundManager::setupDevices() > > > Debug: Xwax Vinyl control starting with a sample rate of: 44100 > > > Debug: Building timecode lookup tables... > > > > > > Allocating 2097152 slots (8192Kb) for 20 bit timecode (Serato 2nd Ed., > > > side A) > > > Debug: Created new VinylControlXwax! > > > > > > Debug: Xwax Vinyl control starting with a sample rate of: 44100 > > > Debug: Building timecode lookup tables... > > > > > > Debug: Created new VinylControlXwax! > > > > > > Debug: iNumDevicesOpenedForOutput: 0 > > > Debug: iNumDevicesOpenedForInput: 0 > > > Debug: SoundManager::getDeviceList > > > Debug: DlgPrefVinyl::slotUpdate() > > > Debug: SoundManager::getDeviceList > > > Debug: DlgPrefSound::slotApplyApi > > > Debug: SoundManager::closeDevices() > > > Debug: SoundManager::setupDevices() > > > Debug: Xwax Vinyl control starting with a sample rate of: 44100 > > > Debug: Building timecode lookup tables... > > > > > > Allocating 2097152 slots (8192Kb) for 20 bit timecode (Serato 2nd Ed., > > > side A) > > > Debug: Created new VinylControlXwax! > > > > > > Debug: Xwax Vinyl control starting with a sample rate of: 44100 > > > Debug: Building timecode lookup tables... > > > > > > Debug: Created new VinylControlXwax! > > > > > > Debug: iNumDevicesOpenedForOutput: 0 > > > Debug: iNumDevicesOpenedForInput: 0 > > > Debug: DlgPrefVinyl::slotUpdate() > > > Debug: SoundManager::getDeviceList > > > Debug: SoundManager: Setting defaults > > > Debug: SoundManager::getDeviceList > > > Debug: SoundManager::getDeviceList > > > Debug: SoundManager::getDeviceList > > > Debug: SoundManager::getDeviceList > > > Debug: DlgPrefVinyl::Apply > > > Debug: in VinylGainSlotApply() with gain: 1 > > > Debug: Setting Gain Text > > > Debug: DlgPrefVinyl::slotUpdate() > > > Debug: SoundManager::getDeviceList > > > Debug: DlgPrefSound::Apply > > > Debug: Setting ChannelMaster in config to: "" > > > Debug: request msec 64 > > > Debug: SoundManager::closeDevices() > > > Debug: SoundManager::setupDevices() > > > Debug: Xwax Vinyl control starting with a sample rate of: 44100 > > > Debug: Building timecode lookup tables... > > > > > > Allocating 2097152 slots (8192Kb) for 20 bit timecode (Serato 2nd Ed., > > > side A) > > > Debug: Created new VinylControlXwax! > > > > > > Debug: Xwax Vinyl control starting with a sample rate of: 44100 > > > Debug: Building timecode lookup tables... > > > > > > Debug: Created new VinylControlXwax! > > > > > > Debug: iNumDevicesOpenedForOutput: 0 > > > Debug: iNumDevicesOpenedForInput: 0 > > > Debug: SoundManager::getDeviceList > > > Debug: Midi OK (Workaround not required) > > > Debug: setupMappings( > > > "/usr/local/share/mixxx/midi/Evolution_Xsession.midi.xml" ) > > > Debug: Destroying MixxxApp > > > Debug: Write track xml, 0 > > > Debug: close soundmanager 682 > > > Debug: SoundManager::closeDevices() > > > Debug: soundmanager->close() done > > > Debug: delete soundmanager, 710 > > > Debug: SoundManager::clearDeviceList() > > > Debug: SoundManager::closeDevices() > > > TerminateHostApis in > > > TerminateHostApis out > > > Debug: delete master, 718 > > > Debug: in ~EngineMaster() > > > Debug: delete channel1, 719 > > > Debug: delete channel2, 723 > > > Debug: delete buffer1, 726 > > > Debug: delete buffer2, 732 > > > Debug: delete view, 741 > > > Debug: delete tracks, 905 > > > Debug: save config, 945 > > > Debug: delete config, 959 > > > > > > > > > > > > > > > > > > > > > > > > On Dec 9, 2007 12:13 PM, Arve Knudsen <[EMAIL PROTECTED]> wrote: > > >> It doesn't look like you have PA compiled with JACK support, Jason. If > > >> you're on Ubuntu you should install libjack-dev before compiling PA. > > >> > > >> Arve > > >> > > >> On Sun, 09 Dec 2007 20:03:51 +0100, Jason Schaefer > > >> <[EMAIL PROTECTED]> wrote: > > >> > > >> > > >> > sr/lib/libportaudio.so.2 > > >> > linux-gate.so.1 => (0xffffe000) > > >> > librt.so.1 => /lib/tls/i686/cmov/librt.so.1 (0xb7ed8000) > > >> > libasound.so.2 => /usr/lib/libasound.so.2 (0xb7e12000) > > >> > libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb7dec000) > > >> > libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 > > >> > (0xb7dd4000) > > >> > libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7c8a000) > > >> > /lib/ld-linux.so.2 (0x80000000) > > >> > libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0xb7c86000) > > >> > > >> > > >> > > > > > > > ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Mixxx-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mixxx-devel
