Hello. Rua Haszard Morris wrote: >>From my research it appears that the Numark Total Control's LEDs can be >>used/turned on by Mixxx, but it's unclear of the status for the other >>controllers. I'm assuming this means that Mixxx can't use the LEDs on the >>Vestax or the M-Audio controllers.
As long as the devices accept regular MIDI Note On/Note Off or Control Change commands for their LEDs, then Mixxx can control them. v1.6.1 sends 0x7f to turn on and 0x00 to turn off. Mixxx trunk (i.e. the next release) supports arbitrary values for on and off, defined in the device XML file described here: http://www.mixxx.org/wiki/doku.php/midi_controller_mapping_file_format You can also find information for the 1.6.1 file format at that link, as you'll likely need to create or modify one to add outputs. Let us know if you have any questions or problems. Sincerely, Sean M. Pappalardo "D.J. Pegasus" <<--------------------------------------------------------------------------------->> This E-Mail message has been scanned for viruses and cleared by >>SmartMail<< from Smarter Technology, Inc. <<--------------------------------------------------------------------------------->> ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Mixxx-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mixxx-devel
