Hallo
> perhaps a old question but I didn't found any infos...
>
> On my system I can capture with lavrec -d2 just fine and get a 1/4 PAL, but
> then I try -d1 I get something like this:
With -d 2 you should get the halfe PAL size: (352x288) or if you get
square pixles: 384x288. If you really get the 1/4 when you use -d 2
(about 180x144) you have a big problem.
X
> +---------------------------------------------------+~~~~|~~~~~~~~
> | | | | |
> | | M O V I E | |Y2 |
> ... ................
> | B | X2 | | |
> | L |-----------------------------------------------|~~~~| |
> | A | | Y
> | C B L A C K | |
> | K | |
> +---------------------------------------------------+~~~~~~~~~~~~|
> X=768 , Y=576
> Y2 looks like 768/2=384 and X2~730
X2 = 730, might be accepted, but the boarder is still huge.
But the Y2 looks strange.
> I get the same big black part bottom to the movie with -d21.
> The black part on the left side of the movie is much smaller but still
> exist on my -d2 capturing test.
> A test with -d12 run "fine".
Which dc10 do you have: dc10old, dc10old_vpxadv, dc10new, dc10plus ? To
find out wich one you have please take a look in the zoran drivers FAQ.
Which zoran driver version do you use ?
> I've test it with 2 VCRs and different tapes (some tapes with and some
> without macrovision).
> At all the same happens.
> I didn't test a NTSC tape with PAL60 or NTSC nativ. This is on my todo list
> for tomorrow.
The Video decoder of the DC10 is very likely not able to decode PAL60
(or NTSC 4.43)
Do you have a better video source than a VCR ? Please test it with a
better source more stabel, like TV broadcast.
> It also still happens then I connect a video signal enhancer box between
> the VCR and the capture card.
What type on enhancer ist it ?
> A capturing from another source is also impossible because I had cancel the
> cabel company last week to change to DVB-T, based on a PCI card. This card
> is now not in the system!
You need a analog source. to test it with the DC10.
> ToDo's:
> - capture NTSC tape nativ with -d1
That should work.
> - capture NTSC tape with -d1 and VCR translation to PAL60
That will very likely not work. But test it.
> - build a new vanilla kernel von kernel.org (2.4.20 is fine?)
The 2.4.20 (also with 2.4.21) workes fine with the new zoran driver from
SF.
auf hoffentlich bald,
Berni the Chaos of Woodquarter
Email: [EMAIL PROTECTED] [EMAIL PROTECTED]
www: http://www.lysator.liu.se/~gz/bernhard
-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner.
Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission!
INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php
_______________________________________________
Mjpeg-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
