Hallo > > > What happens if you revert that pulldown with yuvkineco (-F 1) and take > > > than a look at the stream ? > > > I get the error "unsupported field order" and no stream. > > I can report some progress on this front: upon checking the yuvkineco > code for this error message, I discovered that the .dv file being > generated by dvgrab is created (or at least flagged as) bottom field > first, which yuvkineco apparently can't deal with. Nothing that a bit > of fiddling with yuvcorrect can't work around, though. So, I modify the > test chain from section 3.4.3 of the HOWTO as follows: > > smil2yuv -f 40 test.dv | \ > yuvcorrect -T LINE_SWITCH -T INTERLACED_TOP_FIRST | \ > yuvkineco -F 1 | \ > y4mtoppm | pnmsplit - pnm/image%.pnm > > and out the other end, I get 31 non-interlaced frames (out of the > original 40 from smil2yuv), which all appear to be paired up properly. > It even seems to properly catch cases where the cycle changes, as seems > to happen consistently around scene changes. Fine. :)
> So, does this mean that I am in fact seeing 3:2 pulldown? If so, I > assume I'll have to be careful when editing out commercials in Kino, to > make sure I stay on the cycle -- or can yuvkineco detect and correct for > cycle changes introduced upstream in that fashion? For conversion to > NTSC SVCD MPEG2, I assume I'll need to use the -F 4 setting for > yuvkineco, which will presumably duplicate frames as necessary. As far I know the source is not Interlaced. Enterprise is also broadcast in Europe. And there it is not interlaced. So I would suggest what you have alreaddy found out. First correct the wrong interlacing and than run yuvkineco. You can also use yuvplay instead of pnmsplit to see what happens. One note: Scene changes can happen every field. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users