Hi Bernhard, I appreciate the input. A question: how do you measure frame drops while recording to /dev/null ?
Thanks, Jon > Hallo > > > It's the Tyan S2460 "TigerMP". > After that board came the TigerMPX (S2466) ? > I have the tiger MPX board but use zoran cards. At least in my case it > seem that the 2.6.0 test4 kernel workes better with the board and the > CPU's disks. I have had less framedrops in my first test. But that can > also be wrong (=more tests to do). > I use a Adaptec 29160 Ultra160 (64Bit PCI) with works well. > > > > On Tue, 2003-09-02 at 18:59, Jon Stahl wrote: > > > > > - 1.6G Athlon system > > > > I'm *still* getting lot's of frame drops. I don't know what else to > > > > try. Any suggestions would be greatly appreciated ... > > > What mainboard? > Have you tried recording to /dev/null ? With that you should not need to > care about the disk and Disk Controller. The DDYS (10k rpm if I remeber > correct) disk should be able to handle the bandwith very easy. > > auf hoffentlich bald, > > Berni the Chaos of Woodquarter > > Email: [EMAIL PROTECTED] [EMAIL PROTECTED] > www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
