> I have given up ... > > I think there is no change left that I will ever get my MSI K7N2G-L > motherboard to properly work with my DC10+ .. > > And I used to capture wonderful broadcast-quality videos with this card > using my old ABIT BP6 (Dual Celeron) motherboard. > > But since I changed my motherboard, I have diagonal lines that move > slowly across the captured video, this happens both with xawtv and > lavrec. >
[...] I had the same when I changed my motherboard to an Asus P4PE, only I had vertical bands. http://www.xs4all.nl/~bvanoort/test_with_xawtv_snapshot.jpg It seems that the DC10 cannot properly handle smal fluctuations in the 5V line. This line can get polluted by other devices in your PC, especially by some graphic cards or the voltage regulators that feed your processor. You can try swapping PCI cards and see if this works. If it is your motherboard and you feel brave ;-) you can put an extra capacitator on the DC10+ board. This will filter the 5V analog line for the SAA7110 chip. You can find instructions how to do this on the Pinnacle forum. Just search for "diagonal lines" or "diagonal bands". It is not an easy job and your warranty is gone, but it really works. Kind regards, Bert van Oort ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
