Hello, I updated from the CVS last night and was able to produce something that at least ogle could run without any error messages, even with the output set for full rate. But I could only mplex to about 350 MByte then it would abort with "buffer overflow" message. I have not been able to get past that now. But it appears that my dropped sound parts might be cleared up. I haven't been able to get a full output to attempt a burn yet and try it on DVD player though.
I updated again this morning from CVS and tried to mplex again with the same message. So I figure, well back to the beginning. But this time I wrote a script! Script ran and I still have the same error message regarding a buffer overflow. I tried encoding the audio again and bring it down 192 kbps from the default of 224 thinking that if the video was slowed then perhaps they are too far off from each other. But that didn't help it either. I tried several different rates but still had the error message. Even when I used default rate like it was before. My current script is configured to achieve 7500 kbps as reported by mplayer on the final mpeg output file. But I am only able to mplex about 350 MBytes or 30 minutes then it aborts. Any suggestions on this one! The messages are below. Thanks, James ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=157704192 required(DTS)=157402974 ++ WARN: [mplex] Video e0: buf= 164668 frame=052409 sector=00143782 ++ WARN: [mplex] Audio c0: buf= 891 frame=073007 sector=00020818 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=157866182 required(DTS)=157565136 ++ WARN: [mplex] Video e0: buf= 77593 frame=052463 sector=00143912 ++ WARN: [mplex] Audio c0: buf= 1671 frame=073081 sector=00020839 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=158028173 required(DTS)=157727298 ++ WARN: [mplex] Video e0: buf= 77593 frame=052517 sector=00144043 ++ WARN: [mplex] Audio c0: buf= 2451 frame=073154 sector=00020860 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=158191007 required(DTS)=157886457 ++ WARN: [mplex] Video e0: buf= 59368 frame=052570 sector=00144191 ++ WARN: [mplex] Audio c0: buf= 1211 frame=073232 sector=00020882 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=158352998 required(DTS)=158048619 ++ WARN: [mplex] Video e0: buf= 57343 frame=052624 sector=00144336 ++ WARN: [mplex] Audio c0: buf= 1991 frame=073305 sector=00020903 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=158515200 required(DTS)=158210781 ++ WARN: [mplex] Video e0: buf= 59368 frame=052678 sector=00144480 ++ WARN: [mplex] Audio c0: buf= 751 frame=073382 sector=00020925 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=158677822 required(DTS)=158372943 ++ WARN: [mplex] Video e0: buf= 59368 frame=052732 sector=00144626 ++ WARN: [mplex] Audio c0: buf= 1531 frame=073456 sector=00020946 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=158840235 required(DTS)=158535105 ++ WARN: [mplex] Video e0: buf= 57063 frame=052786 sector=00144772 ++ WARN: [mplex] Audio c0: buf= 291 frame=073533 sector=00020968 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=159001804 required(DTS)=158697267 ++ WARN: [mplex] Video e0: buf= 59368 frame=052840 sector=00144916 ++ WARN: [mplex] Audio c0: buf= 1071 frame=073607 sector=00020989 ++ WARN: [mplex] Sequence end marker found in video stream but single-segment splitting specified! **ERROR: [mplex] INTERNAL ERROR: AU buffer overflow ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
