I don't know whether this a transcode or mplex question, but here goes: I used transcode to encode an AVI -- the options were:
transcode -i "/media/videos/blah.avi" -y mpeg -V -N 0x55 -b 64 -o "blah.mpeg" (actually being honest I used gtranscode to generate this, but hey.) When I try to mplex the resulting m1v and mpa together, mplex breaks with: (DTS)=3324900 ++ WARN: [mplex] Video e0: buf= 233219 frame=000874 sector=00005401 ++ WARN: [mplex] Audio c0: buf= 4096 frame=001395 sector=00000127 ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=3763800 required(DTS)=3594900++ WARN: [mplex] Video e0: buf= 233219 frame=000946 sector=00005690++ WARN: [mplex] Audio c0: buf= 4096 frame=001516 sector=00000138**ERROR: [mplex] Too many frame drops -exiting The process worked fine for a shorter clip, but this is a full hour long documentary. My guess (after some googling) is that this has to do with the bit rate on the MP3, which is pretty low (64) compared to the bit rate (auto) on the video. Perhaps the discrepency is too wide to multiplex together?? However, before retranscoding (an overnight deal), do I have the right idea? Here's the transcode infos: INFO: Min bitrate of any one frame = 1158 bits INFO: Max bitrate of any one frame = 393415 bits INFO: Min bitrate over any one second = 121372 bps INFO: Avg bitrate over any one second = 1883342 bps INFO: Max bitrate over any one second = 6786088 bps INFO: Total time: 20693 seconds (05:44:53), 3.09 frames/sec, 0.324 sec/frame. Thanks ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
