> wire plug going in to distributor wiggle a little, but is not falling out.
> Disconnect wire from coil to dist. I get a single spark (at a spark > plug plugged into coil lead) when key is first turned to run position, but > when in start position, NOTHING - no spark. (I also put key in run > position and used a screw driver across the starter - same result, no spark > at coil wire or #4 plug when cranking engine to start. Fix the wire. It goes to the Hall sender in the distributor, which, if broken, disconnected, you won't get spark... --Holland Forced Failure Racing Don't Ask MotorSports [email protected] a2_16V List Owner [email protected] San Jose, California _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
