I could be off base here, but I think you need a steering wheel puller to get that off. I was fortunate when I got my car that the PO had taken off the steering wheel before, so my new wheel was a cinch to put on.
You may also want to verify that you have the correct hub adapter from Momo- I think they are different. Brice '89 GTI 16v- Momo Corse wheel -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Rob Baldwin Sent: Tuesday, June 05, 2001 8:38 AM To: '[email protected]' Subject: hub adapter I just got my hub adapter for a MOMO wheel that's going into my '86 GTI. The hole for the steering column in the hub adapter is too small. I noticed that my steering column has the add-on toothed ring making the column a lot thicker than it would be otherwise. Looks like if I can get this ring off, the hub adapter will fit fine. Anybody know how I can pull this ring off? (looks like it would be quite a b*tch) Or am I better off getting the right hub adapter? Rob B. '86 GTI Hybrid _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
