Its gonna be a little lumpier... I run a 260 intake so its not so bad, but then again I come from aircooled circles which when dropped ride like a go-cart...
VWMS mounts are 80-90 durometer and stock are 40-50 is what VWMS in Hannover says... nice thing is that the front mount is still hydraulic( rubber is MUCH tougher to poke w/ finger test and its thicker) so it does dampen some... ----- Original Message ----- From: <[email protected]> To: <[email protected]> Sent: Friday, June 08, 2001 6:08 PM Subject: Re: Control Arm Bushing Replacement > Potter sells VMS control arm bushings too. they're a bitch to press in too. > I gave up and took em to a machine shop. I also heard that Shine Racing > sells new control arms with VMS bushings already pressed into them. > > Drew, when you said the VMS mounts are too bad, is that with the 1200 lb > springs or whatever you're running? > > How are they compared to stock? My idle's lumpy enough with the 276. Are > stiffer mounts only going to make it worse? > > Matt > _____________ > List Sponsor: http://www.netsville.com > To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message > See us on the web at http://www.a2-16v.com > Visit the 16V Homepage at http://www.gti16v.org _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
