Jeeze Alex, you are a stubborn one, aren't you - check out the dyno chart on the link I provided (it's not my car), keep in mind that I have nearly the same chart from my car (almost exactly), and show me dyno charts of your '87-89 GTI 16V's that don't have that and I'll believe you. Right now, you are saying your butt dyno is more reliable than a DynoJet and that dosen't really cut it for me. Clay
Date: Mon, 17 Sep 2001 12:29:55 EDT From: [email protected] Subject: Re: 2.0 with CIS-E In a message dated 9/17/01 9:13:19 AM, [email protected] writes: << A 2.0l CIS-E car does not behave like a Motronic car. Yes, it has more torque, yes, it's feels great but unfortunately the injection for some reason or another does not do an adequate job of making the engine go up high... and the shift point changes from redline or beyond to about 5800. That is what I mean by 'dosent rev'. I've researched this. >> - - Clay, I've owned a 2.0L CIS-E, and so has my brother, and two of my friends. All of our motors (each with a euro cam) pulled all the way to 6700rpms without a problem. We found that this setup has a small flat spot at 6300rpms, but that's it. Otherwise, they all pulled strong to redline. Since then, one of my friends put in Kent 258's, and it pulls even harder now. Our cars are (were) all '87-89 GTI 16V's, they came from the factory with CIS-E. CIS-E was added to your car, maybe something still isn't right with it. Although I would recommend using Motronic over CIS-E anyday, there is a certain amount of complexity in the swap, especially in the wiring, so it's not something anybody can do. I don't want to discourage anyone from putting a 2.0L in a CIS-E car. They can always upgrade to Motronic later. Alex Ranarivelo South California '91 GTI 16V w/European Motorworks ported 1.8 16V head, euro intake cam, Garrett chip, 50mm intake, Borla exhaust, 3.90 ring and pinion, .80 5th gear, no A/C, neuspeed lowering springs, rear tri-tie bar, and 16 in. ABT wheels. 140hp@the wheels. <A HREF="http://www.iders.com/alexweb/";>Alex's Tuning Information</A> _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
