Here is what I would do. Take the bumper off. Secure bumper to sawhorses or something so that it is facing up. Drill 3/8 in hole somewhere within the area to be removed. Use a coping saw to remove most of the material staying at least 1/8 in from the edge of the hole. Finish up the edge of the hole with a dremel tool and grinding wheel attachment. You may also be able to use the dremel tool with a cutting tip to remove most of the material also if a coping saw is not available. A circular cutting tool could work if you cut from the inside the bumber in the fog light recesses. The only thing to be concerned with is using too high a speed on the dremel tool melting the plastic and bogging out whatever tool fitting you are using with plastic goo.
Rich Blake -----Original Message----- From: Jesse T Walz <[email protected]> To: a2list <[email protected]> Date: Monday, June 10, 2002 4:54 PM Subject: Re: [A2-16v] Factory fog lights. >Yes, if anyone has done this please explain. I would like to >open the wholes in my bumper also. > >Thanks, >Jesse > >Brian Wilkeson wrote: >> >> What would be the best way to cut the holes in the big bumpers for the >> factory fog lights? Anyone ever do this? >> >> Brian >_______________________________________________ >A2-16v mailing list >[email protected] >http://maillist.myip.org/mailman/listinfo/a2-16v >
