Yes I did miss that email. I am also have in slight lag in receiving emails
from the list. About 15-30 minutes. Is anyone else having this problem?
It is a 1990 (.5) with big bumpers but I think the front one was replaced.
From: "Holland J. Phillips" <[email protected]>
To: [email protected]
Subject: FW: [A2-16v] Factory fog lights.
Date: Wed, 12 Jun 2002 16:26:48 -0700
You must have missed this from Rich...
Also, is your big bumper the '90-'92 factory one? The "real" OEM bumper
covers have the fog light holes already open.
--Holland
[email protected]
San Jose, CA
> From: R Blake <[email protected]>
> Date: Mon, 10 Jun 2002 17:44:49 -0700
> To: Jesse T Walz <[email protected]>, a2list <[email protected]>
> Subject: Re: [A2-16v] Factory fog lights.
>
> Here is what I would do. Take the bumper off. Secure bumper to
sawhorses
> or something so that it is facing up. Drill 3/8 in hole somewhere
within
> the area to be removed. Use a coping saw to remove most of the material
> staying at least 1/8 in from the edge of the hole. Finish up the edge
of
> the hole with a dremel tool and grinding wheel attachment. You may also
be
> able to use the dremel tool with a cutting tip to remove most of the
> material also if a coping saw is not available. A circular cutting tool
> could work if you cut from the inside the bumber in the fog light
recesses.
> The only thing to be concerned with is using too high a speed on the
dremel
> tool melting the plastic and bogging out whatever tool fitting you are
using
> with plastic goo.
>
> Rich Blake
>
> -----Original Message-----
> From: Jesse T Walz <[email protected]>
> To: a2list <[email protected]>
> Date: Monday, June 10, 2002 4:54 PM
> Subject: Re: [A2-16v] Factory fog lights.
>
>
>> Yes, if anyone has done this please explain. I would like to
>> open the wholes in my bumper also.
>>
>> Thanks,
>> Jesse
>>
>> Brian Wilkeson wrote:
>>>
>>> What would be the best way to cut the holes in the big bumpers for the
>>> factory fog lights? Anyone ever do this?
>>>
>>> Brian
>> _______________________________________________
>> A2-16v mailing list
>> [email protected]
>> http://maillist.myip.org/mailman/listinfo/a2-16v
>>
>
> _______________________________________________
> A2-16v mailing list
> [email protected]
> http://maillist.myip.org/mailman/listinfo/a2-16v
Check out my website with 45 traffic cams around Pittsburgh seperated by
road.
http://communities.msn.com/Briansmeaninglessstuff
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
