Make sure there is no water in any other connectors. ----- Original Message -----
From: "Steven Arguello" <[email protected]> To: [email protected] Sent: Thursday, October 26, 2017 10:46:57 AM Subject: [mk2-16v] Bad O2 sensor? The other day I drove through a couple of inches of standing water and since then about 30 seconds to a minute after starting it’ll buck and idle really rough, have no power for about 30 seconds to a minute then it clears up and runs fine. When it’s idling rough, I disconnect the sensor and it clears up. I’m thinking the O2 heater shorted out. Anyway, I ordered a new sensor. The biggest deal is that it’s a PITA to change out. -- You received this message because you are subscribed to the Google Groups "MK2-16v" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/mk2-16v. To view this discussion on the web visit https://groups.google.com/d/msgid/mk2-16v/87776105-4185-427A-A518-492086609319%40gmail.com. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "MK2-16v" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/mk2-16v. To view this discussion on the web visit https://groups.google.com/d/msgid/mk2-16v/1868831248.12094658.1509031052643.JavaMail.root%40massed.net. For more options, visit https://groups.google.com/d/optout.
