you'd have to use overlays, like this:
shop=supermarket [0x3900 resolution 24 continue] // icon #1
shop=bakery [0x3901 resolution 24 continue] //icon #2
shop=supermarket | shop=bakery [0x2e02 resolution 24] //transparent bitmap
lie 1 and 2 give supermarkets and bakers different ids, so you can
assign different icons. the 3rd line makes them findable (but invisible)
in one categorie.
Am 01.10.2011 14:52, schrieb Bernhard Moser:
Hi,
Does mkgmap add POI information (street, house number, region, phone, etc.)
also to points
with 3-byte TYP IDs with format 0x1xxss (e.g. 0x11501) or is this only done for
IDs with
format 0x0xxss (e.g. 0x01, 0x2e; with or without subtype) ?
I want to assign different Garmin Typ IDs to POIs of same category (e.g.
Shopping -
Grocery) to separate for instance between supermarket, bakery and butcher. Goal
is to have
several icons for each shop type but all these shops should be searchable,
found in
category 'Shopping - Grocery'.
Therefore I need several Garmin Typ IDs which are within one category. For
above example
there exist the following TYP IDs 0x2e02, 0x10f02 and 0x20f02 to which
different icons can
be assigned and which can be found in 'Shopping - Grocery'.
In Mapsource/Basecamp and on the Oregon 450t all icons are shown as expected.
But only the
icon with TYP ID 0x2e02 has added address and region (which is done by
locator-autofill I
think). To the other TYP IDs (> 0x100ss) no locator information is assigned.
I've already heard about Garmin TYP ID ranges where no 'popup' information is
shown... But
in this case I use TYP IDs which are used by Garmin City Navigator 2012 and on
this map
this POIs have address and region.
Any reason?
Best regards,
Berny
_______________________________________________
mkgmap-dev mailing list
[email protected]
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
[email protected]
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
