El 07/02/17 a las 22:06, nwillink escribió:
For years now I have been keeping all buildings as a separate transparent
gmapsup /img giving it a higher priority/draworder then my normal maps - It
has speeded up my daily runs without loss of detail - same could be done for
rivers/streams etc.
As a bonus I can ,if I wanted to, switch off/on buildings on my device, bit
like contours.
I update my buildings.img when necessary.
This is not an answer to the initial problem but it works
r
Nick
Thanks Nick for the hint.
I had already tried this approach to separate my topo map into three
layers: base map, topo specific elements and contour lines but I get
very different behavior on different Garmin models. Up to now I have
done only a simple test with the commands and results shown below:
#Base map:
java -Xmx600m -ea -jar mkgmap.jar --bounds=bounds.zip --route --latin1
--code-page=1252 --country-name=ESPAÑA --country-abbr=ESP
--family-name="OpenStreetMap Extremadura" --family-id=113 --product-id=1
--description="OpenStreetMap-Extremadura"
--series-name="OSM-Extremadura" --area-name=España
--overview-mapname=ESP-113 --mapname=55113001 --index
--process-destination --process-exits --housenumbers --add-pois-to-areas
--adjust-turn-headings --report-similar-arcs --link-pois-to-ways
--location-autofill=is_in --drive-on=right
--style-file=../resources/styles --style=base typ/ESP-113.TYP
extremadura.o5m
#Topo layer
java -Xmx600m -ea -jar mkgmap.jar --family-id=513 --product-id=1
--family-name="Topo Extremadura" --series-name="Topo-Extremadura"
--area-name=España --overview-mapname=ESP-513
--overview-mapnumber=55513000 --transparent --draw-priority=26 --latin1
--code-page=1252 --style-file=../resources/styles --style=topo
extremadura.o5m
#Merge all layers (contours are prebuilt transparent 60213*.img files
with draw-priority=28)
java -ea -jar mkgmap.jar --latin1 --code-page=1252
--description="OSM+Topo-Extremadura" --country-name=ESPAÑA
--country-abbr=ESP --family-name="OSM+Topo Extremadura" --family-id=313
--product-id=1 --series-name="OSM+Topo Extremadura" --area-name="España"
--overview-mapname=ESP-313 --overview-mapnumber=65313000 --index
--show-profiles=1 ../mapas/extremadura/55113*.img
../mapas/extremadura/6324*.img ../mapas/extremadura/60213*.img
../mapas/extremadura/ESP-313.TYP
Legend HCx: each single tile must be enabled/disabled separately. Tiles
of each layer are identified as OpenStreetMap-Extremadura (base map),
OpenStreetMap (topo) and Curvas de nivel (contour lines).
etrex 20x: only two maps are shown in map info: OpenStreetMap (base map)
and OSM+Topo Extremadura (all layers). If only base map is enabled,
background is black.
Edge 800: map info shows three maps, but they all have the same name and
properties and it's necessary to enable/disable them by turns to know
which is which.
As I've said, it was only one test and I probably have to play with
description parameters to get a more homogeneous behavior, so any hint
would be much appreciated.
_______________________________________________
mkgmap-dev mailing list
[email protected]
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
