well, for a short answer is NO grub1 and grub-almost-2 use different configs and Absolutely different way of loading OS
I do not want to into details this season ))) but it is simply NO PS :: when you upgrade to grub2 it should automatically re-read your configs and generate a new one, based on these If it does not - then you are in the troubles,,, may be BIOS may be disk ID does not match On Sat, 2010-12-25 at 05:31 -0800, Leslie S Satenstein wrote: > Can we mix grub with grub2? > > Is there a Grub2 option to send grub2 to boot the mbr on another drive? > > > grub2 made a config file. It lists all the software, but unfortunately the > windows software won't boot. > > To allow me to use windows, I have to reconfigure the drives so that grub > starts. > > herein is what the device map looks like. > > (hd0) /dev/disk/by-id/ata-WDC_WD2500KS-00MJB0_WD-WCANK3319914 > (hd1) /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WCAV5F050681 > (hd2) /dev/disk/by-id/ata-Maxtor_6L200R0_L59KKSVH > > On hd0, I have windows 7 for 1/2 drive and data for the other half > on hd1 I have Debian Squeeze > oh hd2 I have Fedora and XP > > If the drives are configured as hd2,hd0,hd1, I can boot fedora or either > windows version > > If the drives are configured as hd1, hd0, hd2, then Debian and Fedora can be > booted. > > Is there a Grub2 option to send grub2 to boot the mbr on another drive? > > ------------------ > > Regards > Leslie > Mr. Leslie Satenstein > > > mailto:[email protected] > mailto [email protected] / [email protected] > www.itbms.biz > > Regards > Leslie > _______________________________________________ > mlug mailing list > [email protected] > https://listes.koumbit.net/cgi-bin/mailman/listinfo/mlug-listserv.mlug.ca _______________________________________________ mlug mailing list [email protected] https://listes.koumbit.net/cgi-bin/mailman/listinfo/mlug-listserv.mlug.ca
