The patch titled
pata_hpt366: Enable bits are unreliable so don't use them
has been removed from the -mm tree. Its filename was
pata_hpt366-enable-bits-are-unreliable-so-dont-use-them.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: pata_hpt366: Enable bits are unreliable so don't use them
From: Alan Cox <[EMAIL PROTECTED]>
Various people had problems with both old and new IDE when hpt366 enable bits
started getting honoured. It turns out they are not reliable so don't rely on
them
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Jeff Garzik <[EMAIL PROTECTED]>
Cc: Tejun Heo <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/ata/pata_hpt366.c | 28 +---------------------------
1 files changed, 1 insertion(+), 27 deletions(-)
diff -puN
drivers/ata/pata_hpt366.c~pata_hpt366-enable-bits-are-unreliable-so-dont-use-them
drivers/ata/pata_hpt366.c
---
a/drivers/ata/pata_hpt366.c~pata_hpt366-enable-bits-are-unreliable-so-dont-use-them
+++ a/drivers/ata/pata_hpt366.c
@@ -220,32 +220,6 @@ static int hpt36x_cable_detect(struct at
return ATA_CBL_PATA80;
}
-static int hpt36x_pre_reset(struct ata_port *ap, unsigned long deadline)
-{
- static const struct pci_bits hpt36x_enable_bits[] = {
- { 0x50, 1, 0x04, 0x04 },
- { 0x54, 1, 0x04, 0x04 }
- };
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
- return -ENOENT;
-
- return ata_std_prereset(ap, deadline);
-}
-
-/**
- * hpt36x_error_handler - reset the hpt36x bus
- * @ap: ATA port to reset
- *
- * Perform the reset handling for the 366/368
- */
-
-static void hpt36x_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL,
ata_std_postreset);
-}
-
/**
* hpt366_set_piomode - PIO setup
* @ap: ATA interface
@@ -351,7 +325,7 @@ static struct ata_port_operations hpt366
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = hpt36x_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = hpt36x_cable_detect,
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
pata_acpi-restore-driver-vs-libata-clean-up-sff-init-mess-fix.patch
libata-add-support-for-ata_16-on-atapi.patch
fix-build-failure-for-drivers-ata-pata_sccc.patch
hpt3x2n-correct-revision-boundary.patch
pata_sis-fix-and-clean-up-some-timing-setups.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
testing-patch-for-ali-pata-fixes-hopefully-for-the-problems-with-atapi-dma.patch
pata_ali-more-work.patch
ide-add-seagate-stt20000a-to-dma-blacklist.patch
serial-use-resource_size_t-for-port-io-addresses.patch
add-pci_try_set_mwi.patch
fix-pci_find_present.patch
pci_find_slot-mark-deprecated.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
watchdog-documentation.patch
add-pci_try_set_mwi-prism54pci.patch
doc-kernel-parameters-use-x86-32-tag-instead-of-ia-32.patch
make-proc-tty-drivers-use-seq_list_xxx-helpers.patch
update-zilog-timeout.patch
edd-switch-to-pci_get-based-api.patch
i2o_cfg_passthru-cleanup.patch
i2o_cfg_passthru-cleanup-fix.patch
wrong-memory-access-in-i2o_block_device_lock.patch
i2o-message-leak-in-i2o_msg_post_wait_mem.patch
i2o-proc-reading-oops.patch
i2o-debug-output-cleanup.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
