The patch titled
serial: speed setup failure reporting
has been removed from the -mm tree. Its filename was
serial-speed-setup-failure-reporting.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: serial: speed setup failure reporting
From: Alan Cox <[EMAIL PROTECTED]>
Invalid speeds are forced to 9600. Update the code for this to encode new
style baud rates properly.
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Russell King <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/serial/serial_core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff -puN drivers/serial/serial_core.c~serial-speed-setup-failure-reporting
drivers/serial/serial_core.c
--- a/drivers/serial/serial_core.c~serial-speed-setup-failure-reporting
+++ a/drivers/serial/serial_core.c
@@ -371,7 +371,8 @@ uart_get_baud_rate(struct uart_port *por
*/
termios->c_cflag &= ~CBAUD;
if (old) {
- termios->c_cflag |= old->c_cflag & CBAUD;
+ baud = tty_termios_baud_rate(old);
+ tty_termios_encode_baud_rate(termios, baud, baud);
old = NULL;
continue;
}
@@ -380,7 +381,7 @@ uart_get_baud_rate(struct uart_port *por
* As a last resort, if the quotient is zero,
* default to 9600 bps
*/
- termios->c_cflag |= B9600;
+ tty_termios_encode_baud_rate(termios, 9600, 9600);
}
return 0;
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
git-acpi.patch
8390-split-8390-support-into-a-pausing-and-a-non-pausing-driver-core.patch
hci_ldisc-fix-null-pointer-deref.patch
parisc-new-termios-definitions.patch
git-sh.patch
git-watchdog.patch
geode-lists-are-subscriber-only.patch
get-rid-of-nr_open-and-introduce-a-sysctl_nr_open.patch
get-rid-of-nr_open-and-introduce-a-sysctl_nr_open-fix.patch
sc26xx-new-serial-driver-for-sc2681-uarts.patch
sc26xx-new-serial-driver-for-sc2681-uarts-update.patch
documentation-about-unaligned-memory-access.patch
tty-enable-the-echoing-of-c-in-the-n_tty-discipline.patch
tty-enable-the-echoing-of-c-in-the-n_tty-discipline-checkpatch-fixes.patch
fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline.patch
fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline-update.patch
tty-kill-tty_flipbuf_size.patch
drivers-edac-turnon-edac-device-error-logging.patch
drivers-edac-use-round_jiffies_relative.patch
drivers-edac-add-cell-xdr-memory-types.patch
drivers-edac-add-cell-mc-driver.patch
drivers-edac-i3000-code-tidying.patch
drivers-edac-i3000-replace-macros-with-functions.patch
drivers-edac-add-freescale-mpc85xx-driver.patch
drivers-edac-add-marvell-mv64x60-driver.patch
drivers-edac-add-marvell-mv64x60-driver-fix.patch
dz-clean-up-and-improve-the-setup-of-termios-settings.patch
char-rocket-switch-long-delay-to-sleep.patch
char-rocket-printk-cleanup.patch
char-char-serial-remove-serial_type_normal-redefines.patch
char-mxser_new-ioaddresses-are-ulong.patch
char-stallion-fix-compiler-warnings.patch
char-riscom8-change-rc_init_drivers-prototype.patch
mxser-mxser_new-first-pass-over-termios-reporting-for-the.patch
char-mxser-ioctl-cleanup.patch
tty-let-architectures-override-the-user-kernel-macros.patch
tty-s390-support-for-termios2.patch
moxa-first-pass-at-termios-reporting.patch
n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch
rocket-first-pass-at-termios-reporting.patch
rocket-dont-let-random-users-reset-the-controller.patch
tty_audit-fix-checkpatch-complaint.patch
tty_io-drag-screaming-into-coding-style-compliance.patch
tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch
8250_early-coding-style.patch
8250_gsc-coding-style.patch
8250_hp300-coding-style.patch
8250_hub6-codding-style.patch
8250_pci-coding-style.patch
serial8250-coding-style.patch
8250-enable-rate-reporting-via-termios.patch
serial_core-bring-mostly-into-line-with-coding-style.patch
smbios-dmi-add-type-41-=-onboard-devices-extended-information.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
