The patch titled
serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h
has been removed from the -mm tree. Its filename was
serial-add-addi-data-gmbh-communication-cardsin8250_pcic-and-pci_idsh.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and
pci_ids.h
From: "Krauth.Julien" <[EMAIL PROTECTED]>
Add ADDI-DATA GmbH communication cards to 8250_pci driver. Supported cards
are:
APCI-7300, APCI-7420, APCI-7500, APCI-7800 APCI-7300-2, APCI-7420-2,
APCI-7500-2 APCI-7300-3, APCI-7420-3, APCI-7500-3, APCI-7800-3
[EMAIL PROTECTED]: coding-style fixes]
Signed-off-by: Krauth J. <[EMAIL PROTECTED]>
Cc: Russell King <[EMAIL PROTECTED]>
Cc: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/serial/8250_pci.c | 133 ++++++++++++++++++++++++++++++++++++
include/linux/pci_ids.h | 17 ++++
2 files changed, 150 insertions(+)
diff -puN
drivers/serial/8250_pci.c~serial-add-addi-data-gmbh-communication-cardsin8250_pcic-and-pci_idsh
drivers/serial/8250_pci.c
---
a/drivers/serial/8250_pci.c~serial-add-addi-data-gmbh-communication-cardsin8250_pcic-and-pci_idsh
+++ a/drivers/serial/8250_pci.c
@@ -106,6 +106,32 @@ setup_port(struct serial_private *priv,
}
/*
+ * ADDI-DATA GmbH communication cards <[EMAIL PROTECTED]>
+ */
+static int addidata_apci7800_setup(struct serial_private *priv,
+ struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = 0, offset = board->first_offset;
+ bar = FL_GET_BASE(board->flags);
+
+ if (idx < 2) {
+ offset += idx * board->uart_offset;
+ } else if ((idx >= 2) && (idx < 4)) {
+ bar += 1;
+ offset += ((idx - 2) * board->uart_offset);
+ } else if ((idx >= 4) && (idx < 6)) {
+ bar += 2;
+ offset += ((idx - 4) * board->uart_offset);
+ } else if (idx >= 6) {
+ bar += 3;
+ offset += ((idx - 6) * board->uart_offset);
+ }
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
* AFAVLAB uses a different mixture of BARs and offsets
* Not that ugly ;) -- HW
*/
@@ -752,6 +778,16 @@ pci_default_setup(struct serial_private
*/
static struct pci_serial_quirk pci_serial_quirks[] = {
/*
+ * ADDI-DATA GmbH communication cards <[EMAIL PROTECTED]>
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ADDIDATA_OLD,
+ .device = PCI_DEVICE_ID_ADDIDATA_APCI7800,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = addidata_apci7800_setup,
+ },
+ /*
* AFAVLAB cards - these may be called via parport_serial
* It is not clear whether this applies to all products.
*/
@@ -1179,6 +1215,12 @@ static struct pciserial_board pci_boards
.base_baud = 115200,
.uart_offset = 8,
},
+ [pbn_b0_8_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[pbn_b0_1_921600] = {
.flags = FL_BASE0,
@@ -2697,6 +2739,97 @@ static struct pci_device_id serial_pci_t
pbn_pasemi_1682M },
/*
+ * ADDI-DATA GmbH communication cards <[EMAIL PROTECTED]>
+ */
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA_OLD,
+ PCI_DEVICE_ID_ADDIDATA_APCI7800,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b1_8_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_8_115200 },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
diff -puN
include/linux/pci_ids.h~serial-add-addi-data-gmbh-communication-cardsin8250_pcic-and-pci_idsh
include/linux/pci_ids.h
---
a/include/linux/pci_ids.h~serial-add-addi-data-gmbh-communication-cardsin8250_pcic-and-pci_idsh
+++ a/include/linux/pci_ids.h
@@ -2043,6 +2043,23 @@
#define PCI_VENDOR_ID_QUICKNET 0x15e2
#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500
+/*
+ * ADDI-DATA GmbH communication cards <[EMAIL PROTECTED]>
+ */
+#define PCI_VENDOR_ID_ADDIDATA_OLD 0x10E8
+#define PCI_VENDOR_ID_ADDIDATA 0x15B8
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500 0x7000
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420 0x7001
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300 0x7002
+#define PCI_DEVICE_ID_ADDIDATA_APCI7800 0x818E
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500_2 0x7009
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420_2 0x700A
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300_2 0x700B
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500_3 0x700C
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E
+#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F
+
#define PCI_VENDOR_ID_PDC 0x15e9
#define PCI_VENDOR_ID_FARSITE 0x1619
_
Patches currently in -mm which might be from [EMAIL PROTECTED] are
origin.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
