Hi Peter, This is what I did: 1) Installed a fresh copy of 1.2.2. By default, the ".mnemosyne" folder is located in your User folder (where you will also find "Downloads", "Appdata", "My Pictures" etc.) 2) I then replace the files in the ".mnemosyne" folder from a backup .mnemosyne folder to restore my cards and configurations. (No problems so far) 3) I try to install mnemosyne 2.0. After installation, I get an error message box that says: ------------------------------------------------------- Runtime Error!
Program: C:\Program Files (x86)\Mnemosyne\mnenosyne.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. ------------------------------------------------------- 4) I click the "OK" button on the box. Nothing happens. 5) I tried an alternate method where I complete uninstall version 1.2.2 and re-install version 2.0. I tried to do the "import" of the 'Mnemosyne 1.x mem files' but the program doesn't recognize the files (in other words, there is nothing to choose in the folder where the version 1.2.2 files are located....just a total blank!) I'm not sure if this is important to know (I think so) but here are some differences between versions 1.2.2 and 2.0 that I noticed: a) when you install version 2.0, a "matplotlib" folder is created in your User folder - also, the backup folder for version 2.0 is located in User --> AppData --> Roaming ---> "Mnemosyne" (you will only see this if you un-install version 1.2.2 first before installing version 2.0 because if you install version 2.0 on top of version 1.2.2 then the Mnemosyne folder doesn't exist in the Roaming sub-folder) b) the backup files for version 2.0 seem to be "db" format while the format for version 1.2.2 are "bz2" files I am hoping I am not the only one having these problems. More information about my system: Windows 7 Home Premium, 64-bit 8 gig ram intel i-3450 Thank you for your help Peter and this is an amazing program! I really wish I can use the newest version though! Thanks again, Kevin On Saturday, July 14, 2012 11:15:51 PM UTC-7, Peter Bienstman wrote: > > Hi, > > Normally it should have upgraded the files automatically if they are > in a standard location. > > Otherwise, just do 'file' 'import' 'Mnemosyne 1.x mem files' and pick > the location of your mem file. > > Peter > > Quoting Kevin <[email protected]>: > > > Hi Peter, > > > > I installed 2.0 on my desktop and I'm having trouble retrieving my cards > > from my 1.2.2 backup files. Is there a guide somewhere to shows us how > to > > upgrade from 1.2.2 to 2.0 version without losing our cards and other > > configurations? > > > > Thank you for your help, > > Kevin > > > > p.s. mnemosyne is such a great program! unfortunately, I will stay with > > version 1.2.2 until I figure out how to properly upgrade to 2.0.... > > > > -- > > You received this message because you are subscribed to the Google > > Groups "mnemosyne-proj-users" group. > > To view this discussion on the web visit > > https://groups.google.com/d/msg/mnemosyne-proj-users/-/v-oD9MTDh18J. > > To post to this group, send email to > [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > > http://groups.google.com/group/mnemosyne-proj-users?hl=en. > > > > > > > > On Saturday, July 14, 2012 11:15:51 PM UTC-7, Peter Bienstman wrote: > > Hi, > > Normally it should have upgraded the files automatically if they are > in a standard location. > > Otherwise, just do 'file' 'import' 'Mnemosyne 1.x mem files' and pick > the location of your mem file. > > Peter > > Quoting Kevin <[email protected]>: > > > Hi Peter, > > > > I installed 2.0 on my desktop and I'm having trouble retrieving my cards > > from my 1.2.2 backup files. Is there a guide somewhere to shows us how > to > > upgrade from 1.2.2 to 2.0 version without losing our cards and other > > configurations? > > > > Thank you for your help, > > Kevin > > > > p.s. mnemosyne is such a great program! unfortunately, I will stay with > > version 1.2.2 until I figure out how to properly upgrade to 2.0.... > > > > -- > > You received this message because you are subscribed to the Google > > Groups "mnemosyne-proj-users" group. > > To view this discussion on the web visit > > https://groups.google.com/d/msg/mnemosyne-proj-users/-/v-oD9MTDh18J. > > To post to this group, send email to > [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > > http://groups.google.com/group/mnemosyne-proj-users?hl=en. > > > > > > > > On Saturday, July 14, 2012 11:15:51 PM UTC-7, Peter Bienstman wrote: > > Hi, > > Normally it should have upgraded the files automatically if they are > in a standard location. > > Otherwise, just do 'file' 'import' 'Mnemosyne 1.x mem files' and pick > the location of your mem file. > > Peter > > Quoting Kevin <[email protected]>: > > > Hi Peter, > > > > I installed 2.0 on my desktop and I'm having trouble retrieving my cards > > from my 1.2.2 backup files. Is there a guide somewhere to shows us how > to > > upgrade from 1.2.2 to 2.0 version without losing our cards and other > > configurations? > > > > Thank you for your help, > > Kevin > > > > p.s. mnemosyne is such a great program! unfortunately, I will stay with > > version 1.2.2 until I figure out how to properly upgrade to 2.0.... > > > > -- > > You received this message because you are subscribed to the Google > > Groups "mnemosyne-proj-users" group. > > To view this discussion on the web visit > > https://groups.google.com/d/msg/mnemosyne-proj-users/-/v-oD9MTDh18J. > > To post to this group, send email to > [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > > http://groups.google.com/group/mnemosyne-proj-users?hl=en. > > > > > > > > On Saturday, July 14, 2012 11:15:51 PM UTC-7, Peter Bienstman wrote: > > Hi, > > Normally it should have upgraded the files automatically if they are > in a standard location. > > Otherwise, just do 'file' 'import' 'Mnemosyne 1.x mem files' and pick > the location of your mem file. > > Peter > > Quoting Kevin <[email protected]>: > > > Hi Peter, > > > > I installed 2.0 on my desktop and I'm having trouble retrieving my cards > > from my 1.2.2 backup files. Is there a guide somewhere to shows us how > to > > upgrade from 1.2.2 to 2.0 version without losing our cards and other > > configurations? > > > > Thank you for your help, > > Kevin > > > > p.s. mnemosyne is such a great program! unfortunately, I will stay with > > version 1.2.2 until I figure out how to properly upgrade to 2.0.... > > > > -- > > You received this message because you are subscribed to the Google > > Groups "mnemosyne-proj-users" group. > > To view this discussion on the web visit > > https://groups.google.com/d/msg/mnemosyne-proj-users/-/v-oD9MTDh18J. > > To post to this group, send email to > [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > > http://groups.google.com/group/mnemosyne-proj-users?hl=en. > > > > > > > > -- You received this message because you are subscribed to the Google Groups "mnemosyne-proj-users" group. To view this discussion on the web visit https://groups.google.com/d/msg/mnemosyne-proj-users/-/6cbphqnS0rgJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/mnemosyne-proj-users?hl=en.
