Hello, Peter,
Thanks for your prompt response. Unfortunately this did not work either.
Fortunately, the editing changes in the card that I make to the path
specifying where to find the file with the map data are being saved now
and re-appear when I browse the tagged group (not the image itself, of
course, just the path pointing to the image file after I have changed
the path by editing).
I put all the image files for this tagged group into the following
folder, as you suggested:
C:\Users\Jack
Thro\AppData\Roaming\__Mnemosyne\default.db_media\__maps\AfricaCountries
Africa.png, as well as Africa_Lesotho.png and Africa_Algerien.png and
many others, are image files within this folder.
Then I tried editing the card so that it reads, for example:
<img src="maps\AfricaCountries\__Africa.png">
However, I was not able to display the image with this path, either with
the "Preview" button in the "Edit card" display or after closing the
editing and going back to the usual card display inside Mnemosyne.
Checking back with the "Browse cards" command showed that the edits were
properly saved, showing the paths to the files as you suggested.
However, I should point out that although I used what I call the
"backslash" character ("\") as you suggested to show sub-folders within
folders, the saved path used what I call the "forward slash" character
("/") in its place.
I should also point out that when I open the Mnemosyne application, the
name of the database displayed at the top left (above the "File -- Cards
-- Settings -- Help" line) is shown as follows:
Mnemosyne - __TMP__
Inside the directory of my
"C:\Users\Jack Thro\AppData\Roaming\Mnemosyne" folder,
there are three files of type "MEM File" as follows:
_tmp_.mem 10/3/2011 11:02PM 1KB
default.mem 7/22/2013 4:18PM 3,826 KB
and a file for study of Japanese kanji radicals, named
漢字の部首10.11.29.mem 4/14/2012 9/27PM 2,866 KB
It seems that when I open the Mnemosyne application, the _tmp_.mem file
is being used as the database (not by my choice!) Would it perhaps help
if I could somehow change the database file to the default.mem file
instead? I don't know how to do that.
Thanks again!
Jack Thro
2013/8/2 Peter Bienstman <[email protected]
<mailto:[email protected]>>
Hi,
Instead of putting your media in
C:\Users\Jack
Thro\AppData\Roaming\__Mnemosyne\maps\__AfricaCountries\Africa.png"
Put them in
C:\Users\Jack
Thro\AppData\Roaming\__Mnemosyne\default.db_media\__maps\AfricaCountries\Africa.__png"
Then, edit your card so that it readsreads:
<img src="maps\AfricaCountries\__Africa.png">
That should work.
Not sure what you meant by the editing not being saved, but perhaps
it's worth pointing out that in the card browser list, images are
never displayed.
Hope this helps,
Peter
On 08/02/2013 09:28 AM, Tonde Monai wrote:
Gnome,
I am begging for help again. I tried following your advice as
well as I
could to get everything in decent order for using Mnemosyne version
2.2.1. Most tagged groups of cards are working well, but I am
not able
to get graphical images to appear---all I get is a question mark
surrounded by a small blue box where I want to see an image.
Much of the
work that I did before involved learning the names of countries and
states from an outline map, and I want to continue reviewing this
information with Mnemosyne.
I have backups of the data that I was using from v1.x;
everything works
except for those categories (now "tags") that use images. My old
data,
including graphic images, is now in the following v2.x location:
C:\Users\Jack Thro\AppData\Roaming\Mnemosyne
To keep things simple while focusing on the problem, I have isolated
just two "map-type" cards out of the large pile and given them
the tag
"Africatest" and tried to work with them. These two cards are for
Algeria and Lesotho. Both have "Recognition" and "Production"
versions,
giving a total of four cards with the "Africatest" tag.
For example, when the system shows me the word "Algeria" and a
question
mark (probably for the map of Africa with the country Algeria
painted in
red),
I click the "Show answer" bar and then get the word "Algeria"
above a
larger rectangle with the same small question mark in the
center. I next
press "Ctrl+E" to edit this card.
The "Edit card" display then pops up. The "Blank map" box in the
"Edit
card" display shows:
<img src="Africa_22_.png">
(The map that I want to display is labeled simply "Africa.png"
However,
every time I try to improve the situation, I get the above line
with a
number surrounded by underbars, like the _22_ above, and the
number is
increased by one every time I try it.) Apparently I have tried
to edit
this card 22 times by now, but still no luck!
I edit that box to show the path to the Windows folder where the map
file is located and the correct name of the file, so that it now
reads
as follows:
<img src="C:\Users\Jack
Thro\AppData\Roaming\__Mnemosyne\maps\__AfricaCountries\Africa.png">
When I next click the "Preview" box on the "Edit card" display,
I see on
the "Preview cards" display only the rectangles surrounding the same
question mark for both "Question" and "Answer." However, when I
click
the "Next sister card" box on the "Edit card" display, I see the
map of
Africa correctly displayed with the word "Algeria" above it as the
Question. Aha, I think, this is at least some progress, so I want to
save the editing that I have done. I click the "OK" box on the
"Preview
cards" display to return to the "Edit card" display, which is
just as I
have changed it. Now I click the "OK" box on the "Edit card"
display to
return to the flash cards, but the results are just as before.
To see what the data on my cards looks like now, I click "Ctrl+B" to
browse the cards with an "Africatest" flag and find that the
results of
my editing have not been saved. The results are the same when I try
editing the "Marked map" as well as, or instead of, the "Blank map"
fields on the "Edit card" display.
How can I get the cards to retain my editing when I have pointed
them to
the proper image file to be displayed? And is there a simpler
way to do
the editing and point to the proper folder that holds the images
for a
group of cards, e.g., all cards with the same tag, or do I have
to edit
the "Question" and "Answer" fields for each card individually. I am
willing to edit each card one-by-one if that is the only way,
but I want
my editing work to be saved with the other data on the cards.
I hope that you can help me with this problem. I am holding my
breath
waiting for your kind answer.
Thank you,
Jack Thro
On Wednesday, July 24, 2013 11:28:12 PM UTC+9, Gnome wrote:
No problem, glad to help.
kl. 09:34:12 UTC+2 onsdag 24. juli 2013 skrev Tonde Monai
følgende:
Gnome,
Thank you for your help!
After sleeping on the problem, this morning I tried
right-clicking on the Mnemosyne icon on my desktop and
choosing
the "Troubleshoot compatibility" option on the
pull-down menu.
This alone sorted out most of the problem for me, and
I'm now
running on v2.2.1. Thanks again!
Jack Thro in Tokyo
On Wednesday, July 24, 2013 3:35:10 AM UTC+9, Gnome wrote:
I forgot to mention remove the 1.x data from the
2.x folder.
kl. 20:31:04 UTC+2 tirsdag 23. juli 2013 skrev
Gnome følgende:
Normally the 1.x files should be imported to
2.x the
first time mnemosyne stats.
This should work:
1. Make sure you have a backed up copy of the
1.x data.
2. Make sure the 1.x data is in it's orginal
location
(where mnemosyne 1.x accessed it)
3. Delete your database in the mnemosyne 2.x
folder,
it's normally located here:
C:\Users\User\AppData\Roaming\__Mnemosyne
make sure you delete 'default.db_media',
'default.db'
and 'default.db-journal'
and the corresponding files to the database if you
created a new database (by default it's named
default.db)
4. Start mnemosyne hope that it will import the
1.x files
Good luck!
kl. 08:14:44 UTC+2 tirsdag 23. juli 2013 skrev
Tonde
Monai følgende:
On Thursday, April 18, 2013 1:03:11 AM UTC+9,
> In case you downloaded the Mac version,
you might
want to try again,
>
> as there has been a small confusion in
version
numbers.
>
>
>
> Cheers,
>
>
>
> Peter
I have been using a Version 1.xxx of Mnemosyne
almost daily for more than a year and loved it.
Today I noticed that a newer version was
available
and decided it was time to upgrade.
AArrrrggghhh!
I am running Windows System 7.
Next I uninstalled the previous version of
Mnemosyne. Sad to say goodbye -- it was
working so well!
Then I downloaded mnemosyne-2.1.1-setup.exe
and executed the installation.
The program opened successfully the first
time, but
it wasn't accessing my database.
I added one simple card and tried the "Save As"
command, to see where the program would be
looking
for data. It pointed me to:
C: Computer\Local Disk (C:)\Users\Jack
Thro\mnemosyne
I exited the program, then moved all of my
backup
data into the above folder and tried to
re-start the
program.
At first I received many "unexpected error"
warning
messages, all pointing to plugins in my old
database. I removed all of the plugin
filess and
then tried again to re-start the program. Since
then, I continue to get only one
"unexpected error"
message, as follows:
An unexpected error has occurred.
Please forward the following info to the
developers:
Traceback (innermost last):
File "mnemosyne", line 155, in <module>
File
"mnemosyne\libmnemosyne\____init__.pyo", line
179, in initialise
File
"mnemosyne\libmnemosyne\____init__.pyo", line
295, in load_database
File
"mnemosyne\libmnemosyne\__databases\SQLite.pyo",
line 351, in load
File
"mnemosyne\libmnemosyne\__databases\SQLite_media.pyo",
line 39, in create_media_dir_if_needed
File "os.pyo", line 150, in makedirs
File "os.pyo", line 157, in makedirs
WindowsError:[Error5]Access is
denied:u'backups'
End of error message.
Please give me some suggestions on what to
do. I'm
quite willing to go back to a Version 1.xxx
of the
software if that is the only way.
Thanks!
Jack Thro (aka Tonde Monai)
[email protected] <mailto:[email protected]>
Tokyo, Japan
>
>
> Quoting Peter Bienstman
>
>
>
> >
http://mnemosyne-proj.org/__download-mnemosyne.php
<http://mnemosyne-proj.org/download-mnemosyne.php>
<http://mnemosyne-proj.org/__download-mnemosyne.php
<http://mnemosyne-proj.org/download-mnemosyne.php>>
>
> >
>
> > Mnemosyne 2.2.1 : 2013-04-15
>
> >
>
> > (Note that for Windows users we recommend
uninstalling the previous
>
> > version before installing the new one.)
>
> >
>
> > -The premade cards from the old 1.x
website
have now all been
>
> > converted to the
>
> > new 2.x cards format and put on the new
website. This will make importing
>
> > much easier, as graphics are bundled
(thanks
to Patrick Kenny for the
>
> > conversion).
>
> > -For txt import, a text file can now
contain a
fourth column which will be
>
> > mapped to the 'notes' field of a
Vocabulary card.
>
> > -When editing or browsing cards, don't
reset
the state of the scheduler such
>
> > that you need to press 'show answer'
again or
such that a new card appears
>
> > (reported by Gnome).
>
> > -Remember which tags where
expanded/collapsed
in the tag tree (requested a.o
>
> > by Troy Guze).
>
> > -Correctly update flag 'hide
pronunciation' in
the popup menu (reported by
>
> > Tom Cato Amundsen).
>
> > -When merging duplicate cards, merge
tags also
(requested by Stephan
>
> > Maseizik).
>
> > -Fix regression where all the dialogs
would
have generic names ('mnemosyne')
>
> > as opposed to e.g. 'Add cards'.
>
> > -Correctly format clozes in latex, e.g.
[Lorentz force law]
>
> >
<$>[\mathbf{F}]=[q]([\mathbf{__E}]+[\mathbf{v}\times\mathbf{__B}]</$>
>
> > ()requested by acdenh). If you want
literal []
in latex, use \left[
>
> > and \right].
>
> > -Fix crash when converting multiple
cards at
the same time between e.g.
>
> > Vocabulary card type and Map card type
(reported by Gnome).
>
> > -No longer allow mass converting of
cards to
Cloze card types, as this
>
> > requires editing of the card content
for each
card anyhow (reported by Scott
>
> > Youngman).
>
> > -Fix browser crash occuring after
deleting a
card type which had custom
>
> > formatting (reported by Tom Zerlau).
>
> > -Unless the 'Prefill tag behaviour'
plugin is
active, changing card
>
> > types will
>
> > never change the tag you already
filled in,
even if it's different from the
>
> > last used tag (reported by Gnome).
>
> > -When changing the font for '<all card
types>',
make a more neutral choice
>
> > for default font in case currently
different
card types have different
>
> > fonts (reported by Gnome).
>
> > -Make sync and sync error handling
more robust.
>
> > -In case you don't explicitly select a
background colour, use your theme's
>
> > background colour as opposed to white for
empty cards (reported by
>
> > ialectum).
>
> > -The quote key to left of 1 (`) can
now also be
used as a short cut
>
> > for grade 0
>
> > (requested by Kent Stearman).
>
> > -In the card browser, CTRL+F can be
used to
focus the input on the search
>
> > field (requested by abacus).
>
> > -Improve the position of dialogs
popping up
from the card browser,
>
> > sync window, ... .
>
> > -Fix crash pressing the 'Delete' key
in the
'Activate cards' dialog (reported
>
> > by Gnome).
>
> > -When changing card types, only warn about
losing history when there
>
> > is actual
>
> > history present (reported by Gnome).
>
> > -In case you are not using saved sets and
create a new tag whose parent is
>
> > inactive, make the new tag inactive
too. (If
you have a saved set active,
>
> > you'll get a dialog box asking
whether you
want to activate that tag or not,
>
> > just like before) (reported by Gnome).
>
> > -Fix bug in interaction between Latex
system
and exporting to the 'cards'
>
> > format (reported by Gwern).
>
> > -More tweaks for RTL languages like
Arabic and
Hebrew (bug report by
>
> > Ansgar Bohmann).
>
> > -No more superfluous empty lines for
cards with
RTL languages.
>
> > -When changing languagues, translate
the window
title immediately, instead
>
> > of after reboot.
>
> > -On a Thai system, don't use Thai
numerals in
the card browser if
>
> > the language
>
> > is set to English (requested by Mark).
>
> > -Take time zone information into
account when
displaying creation date of
>
> > card in browser.
>
> > -When renaming a saved set, prefill
the name
field with the previous name of
>
> > the set.
>
> > -Don't reset selected plugin when
importing a
new plugin (reported by Gnome).
>
> > -When trying to deactivate a card type
in use,
show name of the card type in
>
> > the error message.
>
> > -Fix CTRL+F shortcut for inserting flash,
CTRL+D for inserting video, and
>
> > CTRL+C for copying (reported by Gnome).
>
> > -Tab key now cycles through all the grade
buttons (reported by Gnome).
>
> > -Fix grading shortcuts R and W for
'right' and
'wrong' in the cramming
>
> > scheduler.
>
> > -Backspace and delete shortcuts to
delete the
current card work again
>
> > (reported by Dylan Gordhan).
>
> >
>
> > --
>
> > You received this message because you are
subscribed to the Google
>
> > Groups "mnemosyne-proj-users" group.
>
> > To unsubscribe from this group and stop
receiving emails from it,
>
> > send an email to
[email protected]
<mailto:mnemosyne-proj-users%[email protected]>.
>
> > To post to this group, send email to
[email protected]
<mailto:[email protected]>__.
>
> > For more options, visit
https://groups.google.com/__groups/opt_out
<https://groups.google.com/groups/opt_out>
<https://groups.google.com/__groups/opt_out
<https://groups.google.com/groups/opt_out>>.
--
You received this message because you are subscribed to the Google
Groups "mnemosyne-proj-users" group.
To unsubscribe from this group and stop receiving emails from
it, send
an email to [email protected]
<mailto:mnemosyne-proj-users%[email protected]>.
To post to this group, send email to
mnemosyne-proj-users@__googlegroups.com
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/__msgid/mnemosyne-proj-users/__3139d22e-eb67-47e7-9be7-__beea8b2d35a9%40googlegroups.__com
<https://groups.google.com/d/msgid/mnemosyne-proj-users/3139d22e-eb67-47e7-9be7-beea8b2d35a9%40googlegroups.com>.
For more options, visit
https://groups.google.com/__groups/opt_out
<https://groups.google.com/groups/opt_out>.
--
Peter Bienstman
Ghent University, Dept. of Information Technology
Sint-Pietersnieuwstraat 41, B-9000 Gent, Belgium
tel: +32 9 264 34 46 <tel:%2B32%209%20264%2034%2046>, fax: +32 9 264
35 93 <tel:%2B32%209%20264%2035%2093>
WWW: http://photonics.intec.UGent.__be <http://photonics.intec.UGent.be>
email: [email protected]
--
You received this message because you are subscribed to a topic in
the Google Groups "mnemosyne-proj-users" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/__topic/mnemosyne-proj-users/__Tl0YgZQw54E/unsubscribe
<https://groups.google.com/d/topic/mnemosyne-proj-users/Tl0YgZQw54E/unsubscribe>.
To unsubscribe from this group and all its topics, send an email to
[email protected]
<mailto:mnemosyne-proj-users%[email protected]>.
To post to this group, send email to
mnemosyne-proj-users@__googlegroups.com
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/__msgid/mnemosyne-proj-users/__51FB8078.4080508%40UGent.be
<https://groups.google.com/d/msgid/mnemosyne-proj-users/51FB8078.4080508%40UGent.be>.
For more options, visit https://groups.google.com/__groups/opt_out
<https://groups.google.com/groups/opt_out>.
--
You received this message because you are subscribed to the Google
Groups "mnemosyne-proj-users" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/mnemosyne-proj-users/CAONX3N3MkG9Jj1xAxpefmHyphrH%3DF9RTvNWVdRNU8X7zrM3Hiw%40mail.gmail.com.
For more options, visit https://groups.google.com/groups/opt_out.
