What svn server are you using? On 7/22/09, Gareth Cole <[email protected]> wrote: > > Hi Dan, > > Thanks for offering to help. I suspect I've been looking at the wrong code > for scaffolds. > > I was struggling to turn this on with an existing project yesterday, so I > downloaded the latest code from svn today, and tried a clean sample project. > > I used the instructions from the wiki for setting up scaffolding, which seem > to the same as for MG2. Just nothing happens... > > The GDMs work fine, and I've scaffolding turned on in coldspring.xml. I add > <scaffold> tags to the modelglue.xml file, but that's as far as it gets. > > Thanks > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Dan Wilson > Sent: 22 July 2009 16:59 > To: [email protected] > Subject: [Model-Glue] Re: Scaffolding not working in MG3 > > > Scaffolding is implemented in mg3. Do you have a recent version? > > Have you enabled scaffolding in your coldspring.xml? > > > I'm on a client site right now and am typing this to you on my phone. > This means I can't be much direct help now, but i'll help you look > into this later. > > In short, mg3 has scaffolding support and there have even been new > features added. I can give you more specifics later, but I don't think > the scaffolds controller is involved. > > > Dan > > On 7/22/09, Gareth Cole <[email protected]> wrote: >> >> OK. I'm a bit more confused with this now. >> >> I figured out that editing the ModelGlueConfiguration.xml file and adding >> <value>/ModelGlue/gesture/modules/scaffold/config/scaffolding.xml</value> >> to the requestPhases property gets the generateScaffolds() in the >> ScaffoldController.cfc going. >> >> The trouble now, is that generateScaffolds() doesn't generate scaffolds. > It >> looks the same as the generateEvent() function in > GenerationController.cfc. >> It's starting to look like the feature hasn't been fully implemented. >> >> I'd appreciate it if someone can tell me how they got scaffolding working > in >> MG3? >> >> I used the scaffolding extensively in my previous MG2 projects, as it > saved >> me a lot of development time. I'd hoped to use them with MG3, but I'm >> running out of time trying to get this working. >> >> If there's still development to be done on scaffolding in MG3, I'll > happily >> work on this, if someone can explain how it should be implmented. >> >> Thanks, >> >> Gareth >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On >> Behalf Of Chris Blackwell >> Sent: 22 July 2009 14:03 >> To: [email protected] >> Cc: <[email protected]> >> Subject: [Model-Glue] Re: Scaffolding not working in MG3 >> >> >> is scaffolding now in trunk, or is it still just in the scaffold >> branch in svn? >> >> chris >> >> >> On 22 Jul 2009, at 13:46, "Gareth Cole" <[email protected]> wrote: >> >>> >>> I checked that and it's fine. >>> >>> I've been trying to dig into this, but it's a bit hard to figure out >>> what >>> should be happening. >>> >>> I know that the function generateScaffolds() isn't being called in >>> /ModelGlue/gesture/modules/scaffold/controller/ScaffoldController.cfc >>> This is despite it being set to listen for the >>> 'modelglue.modulesLoaded' >>> message in /ModelGlue/gesture/modules/scaffold/config/scaffolding.xml >>> >>> I know that the 'modelglue.modulesLoaded' message has been broadcast >>> from >>> the debug output. >>> >>> My guess is that the file >>> /ModelGlue/gesture/modules/scaffold/config/scaffolding.xml hasn't been >>> loaded, but I'm not sure where that should have been set. >>> >>> -----Original Message----- >>> From: [email protected] [mailto:model- >>> [email protected]] On >>> Behalf Of Sean Coyne >>> Sent: 22 July 2009 12:56 >>> To: model-glue >>> Subject: [Model-Glue] Re: Scaffolding not working in MG3 >>> >>> >>> make sure your <scaffold> tag is within the <event-handlers> block >>> >>> On Jul 22, 7:00 am, "Gareth Cole" <[email protected]> wrote: >>>> Hi, >>>> >>>> I'm not sure if I'm missing something obvious, but I can't get >>>> scaffolding >>>> to work in MG3. I add <scaffold object="MyObj" /> tags to my >>>> modelglue.xml >>>> file, but nothing gets generated. No error messages or anything else. >>>> >>>> I've got GDMs working fine and I've got the latest version of model- >>>> glue >>>> from svn. I can see that there's scaffolding code in there, but I >>>> can't >>>> figure out why nothing is generated. I've configured the scaffolding >>>> sections of coldspring.xml. Is there anything else I need to set? >>>> >>>> Thanks, >>>> >>>> Gareth >>> >>> >>> > >> >> >> >> > >> > > > -- > "Come to the edge, he said. They said: We are afraid. Come to the > edge, he said. They came. He pushed them and they flew." > > Guillaume Apollinaire quotes > > > > > >
-- “Come to the edge, he said. They said: We are afraid. Come to the edge, he said. They came. He pushed them and they flew.” Guillaume Apollinaire quotes --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "model-glue" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/model-glue?hl=en For more about Model-Glue, check http://www.model-glue.com . -~----------~----~----~----~------~----~------~--~---
