The log is ~600K, so I'll send it to Aleksander directly, but here is one highlight at least:
Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] received generic response (translated)... <<<<<< QMUX: <<<<<< length = 19 <<<<<< flags = 0x80 <<<<<< service = "nas" <<<<<< client = 3 <<<<<< QMI: <<<<<< flags = "response" <<<<<< transaction = 3 <<<<<< tlv_length = 7 <<<<<< message = "Get Home Network" (0x0025) <<<<<< TLV: <<<<<< type = "Result" (0x02) <<<<<< length = 4 <<<<<< value = 01:00:10:00 <<<<<< translated = FAILURE: NotProvisioned Wed Aug 30 15:41:46 2017 daemon.warn [4134]: <warn> [1504107706.271269] [mm-base-sim.c:1424] load_operator_identifier_ready(): couldn't load Operator identifier: 'Couldn't get home network: QMI protocol error (16): 'NotProvisioned'' Wed Aug 30 15:41:46 2017 daemon.info [4134]: <debug> [1504107706.271343] [mm-sim-qmi.c:374] load_operator_name(): loading SIM operator name... Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] sent message... <<<<<< RAW: <<<<<< length = 13 <<<<<< data = 01:0C:00:00:03:03:00:04:00:25:00:00:00 Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] sent generic request (translated)... <<<<<< QMUX: <<<<<< length = 12 <<<<<< flags = 0x00 <<<<<< service = "nas" <<<<<< client = 3 <<<<<< QMI: <<<<<< flags = "none" <<<<<< transaction = 4 <<<<<< tlv_length = 0 <<<<<< message = "Get Home Network" (0x0025) Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] received message... <<<<<< RAW: <<<<<< length = 20 <<<<<< data = 01:13:00:80:03:03:02:04:00:25:00:07:00:02:04:00:01:00:10:00 Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] received generic response (translated)... <<<<<< QMUX: <<<<<< length = 19 <<<<<< flags = 0x80 <<<<<< service = "nas" <<<<<< client = 3 <<<<<< QMI: <<<<<< flags = "response" <<<<<< transaction = 4 <<<<<< tlv_length = 7 <<<<<< message = "Get Home Network" (0x0025) <<<<<< TLV: <<<<<< type = "Result" (0x02) <<<<<< length = 4 <<<<<< value = 01:00:10:00 <<<<<< translated = FAILURE: NotProvisioned Wed Aug 30 15:41:46 2017 daemon.warn [4134]: <warn> [1504107706.335377] [mm-base-sim.c:1425] load_operator_name_ready(): couldn't load Operator name: 'Couldn't get home network: QMI protocol error (16): 'NotProvisioned'' Also I am able to connect manually with mmcli, but the IP listed is not associated with any interface: mmcli -m 0 --simple-connect="pin=1234,apn=fast.t-mobile.com" Tue Aug 29 17:52:49 2017 daemon.debug [4037]: [/dev/cdc-wdm1] Allocating new client ID... Tue Aug 29 17:52:49 2017 daemon.debug [4037]: [/dev/cdc-wdm1] Registered 'wds' (version 1.67) client with ID '35' Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> QMI IPv4 Settings: Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> Address: 22.159.249.232/28 Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> Gateway: 22.159.249.233 Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> DNS #1: 10.177.0.34 Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> DNS #2: 10.177.0.210 Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> MTU: 1500 Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected) Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> Simple connect state (8/8): All done On Wed, Aug 30, 2017 at 10:23 AM, Nathaniel Haggard <[email protected]> wrote: > The log is ~600K, so I attached it, but here is one highlight at least: > > Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] received > generic response (translated)... > <<<<<< QMUX: > <<<<<< length = 19 > <<<<<< flags = 0x80 > <<<<<< service = "nas" > <<<<<< client = 3 > <<<<<< QMI: > <<<<<< flags = "response" > <<<<<< transaction = 3 > <<<<<< tlv_length = 7 > <<<<<< message = "Get Home Network" (0x0025) > <<<<<< TLV: > <<<<<< type = "Result" (0x02) > <<<<<< length = 4 > <<<<<< value = 01:00:10:00 > <<<<<< translated = FAILURE: NotProvisioned > Wed Aug 30 15:41:46 2017 daemon.warn [4134]: <warn> [1504107706.271269] > [mm-base-sim.c:1424] load_operator_identifier_ready(): couldn't load > Operator identifier: 'Couldn't get home network: QMI protocol error (16): > 'NotProvisioned'' > Wed Aug 30 15:41:46 2017 daemon.info [4134]: <debug> [1504107706.271343] > [mm-sim-qmi.c:374] load_operator_name(): loading SIM operator name... > Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] sent > message... > <<<<<< RAW: > <<<<<< length = 13 > <<<<<< data = 01:0C:00:00:03:03:00:04:00:25:00:00:00 > Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] sent generic > request (translated)... > <<<<<< QMUX: > <<<<<< length = 12 > <<<<<< flags = 0x00 > <<<<<< service = "nas" > <<<<<< client = 3 > <<<<<< QMI: > <<<<<< flags = "none" > <<<<<< transaction = 4 > <<<<<< tlv_length = 0 > <<<<<< message = "Get Home Network" (0x0025) > Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] received > message... > <<<<<< RAW: > <<<<<< length = 20 > <<<<<< data = 01:13:00:80:03:03:02:04:00:25: > 00:07:00:02:04:00:01:00:10:00 > Wed Aug 30 15:41:46 2017 daemon.debug [4134]: [/dev/cdc-wdm0] received > generic response (translated)... > <<<<<< QMUX: > <<<<<< length = 19 > <<<<<< flags = 0x80 > <<<<<< service = "nas" > <<<<<< client = 3 > <<<<<< QMI: > <<<<<< flags = "response" > <<<<<< transaction = 4 > <<<<<< tlv_length = 7 > <<<<<< message = "Get Home Network" (0x0025) > <<<<<< TLV: > <<<<<< type = "Result" (0x02) > <<<<<< length = 4 > <<<<<< value = 01:00:10:00 > <<<<<< translated = FAILURE: NotProvisioned > Wed Aug 30 15:41:46 2017 daemon.warn [4134]: <warn> [1504107706.335377] > [mm-base-sim.c:1425] load_operator_name_ready(): couldn't load Operator > name: 'Couldn't get home network: QMI protocol error (16): 'NotProvisioned'' > > > Also I am able to connect manually with mmcli, but the IP listed is not > associated with any interface: > > mmcli -m 0 --simple-connect="pin=1234,apn=fast.t-mobile.com" > > Tue Aug 29 17:52:49 2017 daemon.debug [4037]: [/dev/cdc-wdm1] Allocating > new client ID... > Tue Aug 29 17:52:49 2017 daemon.debug [4037]: [/dev/cdc-wdm1] Registered > 'wds' (version 1.67) client with ID '35' > Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> QMI IPv4 Settings: > Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> Address: > 22.159.249.232/28 > Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> Gateway: > 22.159.249.233 > Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> DNS #1: > 10.177.0.34 > Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> DNS #2: > 10.177.0.210 > Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> MTU: 1500 > Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> Modem > /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> > connected) > Tue Aug 29 17:52:54 2017 daemon.info [4037]: <info> Simple connect state > (8/8): All done > > > > > > > On Tue, Aug 29, 2017 at 11:28 PM, Aleksander Morgado < > [email protected]> wrote: > >> > >> > I've got ModemManager working on the latest version of lede with few >> > problems. Can you provide some debug logs (run ModemManager --debug). >> > >> > Make sure to run the following after starting ModemManager so that >> device >> > events are reported properly >> > >> > . /etc/modemmanager/modemmanager.common >> > mm_cleanup_interfaces >> > ( mm_report_events_from_cache ) >/dev/null 2>&1 & >> > >> >> To clarify, these extra 3 steps are only needed if manually running >> ModemManager, as it would need to get reported the kernel events that >> happened until then. >> >> You can also just edit the /etc/init.d/ModemManager file to add the >> extra --debug, and restart using the init file, and the extra steps >> wouldn't be necessary, as they are done by the init file. >> >> -- >> Aleksander >> https://aleksander.es >> > >
_______________________________________________ ModemManager-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
