Hey,
I did some further testing and I found some warnings while performing my
test for switching between a few operators:
ModemManager[2837]: <warn> [1508280013.114086] [mm-port-serial.c:515]
real_config_fd(): (ttyUSB0): port attributes not fully set
ModemManager[2837]: <debug> [1508280013.114511] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB0) device open count is 1 (open)
ModemManager[2837]: <debug> [1508280013.114716]
[mm-port-serial-at.c:476] mm_port_serial_at_run_init_sequence():
(ttyUSB0): running init sequence...
ModemManager[2837]: <debug> [1508280013.115232] [mm-port-serial.c:1099]
mm_port_serial_open(): (ttyUSB2) opening serial port...
ModemManager[2837]: <warn> [1508280013.117749] [mm-port-serial.c:515]
real_config_fd(): (ttyUSB2): port attributes not fully set
ModemManager[2837]: <debug> [1508280013.119844] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB2) device open count is 1 (open)
ModemManager[2837]: <debug> [1508280013.122116]
[mm-port-serial-at.c:476] mm_port_serial_at_run_init_sequence():
(ttyUSB2): running init sequence...
ModemManager[2837]: <debug> [1508280013.123278]
[mm-broadband-modem.c:8016] enabling_started(): Flashing primary AT port
before enabling...
ModemManager[2837]: <debug> [1508280013.127274]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'ATE0<CR>'
ModemManager[2837]: <debug> [1508280013.128563]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
ModemManager[2837]: <debug> [1508280013.227661]
[mm-broadband-modem.c:3132] load_power_state(): loading power state...
ModemManager[2837]: <debug> [1508280013.234163] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB0) device open count is 2 (open)
ModemManager[2837]: <debug> [1508280013.603986]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.609967]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'ATV1<CR>'
ModemManager[2837]: <debug> [1508280013.623845]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.628900]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.630455]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT+CMEE=1<CR>'
ModemManager[2837]: <debug> [1508280013.648701]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.650298]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'ATX4<CR>'
ModemManager[2837]: <debug> [1508280013.662284]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.663120]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT&C1<CR>'
ModemManager[2837]: <debug> [1508280013.672534]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.673366]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT+CFUN?<CR>'
ModemManager[2837]: <debug> [1508280013.690510]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>+CFUN:
1<CR><LF><CR><LF>OK<CR><LF>'
ModemManager[2837]: <debug> [1508280013.692354] [mm-iface-modem.c:3259]
set_power_state(): No need to change power state: already in 'on' power
state
ModemManager[2837]: <debug> [1508280013.693418] [mm-port-serial.c:1296]
mm_port_serial_close(): (ttyUSB0) device open count is 1 (close)
ModemManager[2837]: <debug> [1508280013.694636] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB0) device open count is 2 (open)
ModemManager[2837]: <debug> [1508280013.697023] [mm-port-serial.c:1237]
mm_port_serial_open(): (ttyUSB0) device open count is 3 (open)
ModemManager[2837]: <debug> [1508280013.702588]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): --> 'AT+IFC=1,1<CR>'
ModemManager[2837]: <debug> [1508280013.724477]
[mm-port-serial-at.c:440] debug_log(): (ttyUSB0): <-- '<CR><LF>+CME
ERROR: 50<CR><LF>'
ModemManager[2837]: Invalid mobile equipment error code: 50
ModemManager[2837]: <debug> [1508280013.725338]
[mm-serial-parsers.c:364] mm_serial_parser_v1_parse(): Got failure code
100: Unknown error
ModemManager[2837]: <debug> [1508280013.725604] [mm-port-serial.c:1296]
mm_port_serial_close(): (ttyUSB0) device open count is 2 (close)
ModemManager[2837]: <warn> [1508280013.725990] [mm-port-serial.c:811]
port_serial_queue_process(): (ttyUSB0) response array is not empty when
using cached reply, cleaning up 14 bytes
is one error sequence
the other error is
ModemManager[2837]: <warn> [1508280021.578899]
[huawei/mm-broadband-modem-huawei.c:2181]
mm_broadband_modem_huawei_peek_port_at_for_data(): Couldn't find
associated cdc-wdm port for 'net/usb0'
Just to update:
The modem is still a Huawei ME909s-120
it's about connecting to 3 or 4 mobile networks, measuring download
speed or similar stuff for each of them
One problem is that I get timeout errors for --3gpp-register-in-operator
if I was connected to a different operator before
e.g. I connect to one operator, it succeeds and I can measure download
speed etc, then if I want to connect to a different operator like 15
seconds after I connected to the first one and it needs 10-15 seconds
until I get a timeout error, I suggest because the modem is still busy
with the previous operations for connecting with the first
operator?!(correct me if I'm wrong)
Is there a way to stabilize connecting that way to different operators?
Because I think I wouldn't have the second problem if that first one was
solved
The second problem is that I get a weird timeout error at disabling the
modem after I recognize that connecting to the third network fails and I
therefore want to disconnect, disable and enable the modem to try
connecting again
When I try to connect to the second operator I just get a timeout error
and after that I try it again with disconnecting, disable and enable the
modem again and then it works
Kind regards,
Marcel
On 15.10.2017 11:35, Marcel H. wrote:
Aah, thanks a lot!
It's just a regular timeout error
As well as the error when I try to disable the modem is also a timeout
error
So maybe I should check somehow if the modem is still busy or
something like that
However, I'll do some further testing tomorrow and will come back if I
find out some more
Am 15.10.2017, 10:37, Aleksander Morgado <[email protected]>
schrieb:
Hey,
> I have a problem when frequently changing operators
>
> I tried to connect to 3 different operators, first enable the
modem, then
> try to register in operator, if successfully I use
simple-connect and
> measure upload speed etc, then disconnect and disable modem and
start over
> again
>
> Well I have some problems now to set up a stable way to connect
to the 3rd
> operator
>
> When I enable the modem and try to use
--3gpp-register-in-operator, it is
> hard to say if it succeeds, so if it doesn't, I just disconnect,
disable and
> enable again, but when I disable the modem at that point it
seems kind of
> busy doing something, but I don't understand what it actually does
>
> I tried to debug mm, but I still don't get it, I hope you don't
mind me
> posting a piece of the debugging output here:
>
> ModemManager[4471]: <debug> [1507757863.162630]
> [huawei/mm-broadband-modem-huawei.c:2438]
modem_load_signal_quality():
> loading signal quality...
> ModemManager[4471]: <debug> [1507757863.163091]
[mm-broadband-modem.c:1991]
> modem_load_signal_quality(): loading signal quality...
> ModemManager[4471]: <debug> [1507757863.163565]
[mm-port-serial.c:1237]
> mm_port_serial_open(): (ttyUSB0) device open count is 6 (open)
> ModemManager[4471]: <info> [1507757864.691217]
[mm-iface-modem.c:1392]
> __iface_modem_update_state_internal(): Modem
> /org/freedesktop/ModemManager1/Modem/0: state changed (registered ->
> disabling)
> ModemManager[4471]: <debug> [1507757864.705892]
[mm-iface-modem.c:1165]
> update_signal_quality(): Modem
/org/freedesktop/ModemManager1/Modem/0:
> signal quality updated (0)
> ModemManager[4471]: <debug> [1507757864.712021]
[mm-iface-modem.c:1282]
> periodic_signal_quality_check_disable(): Periodic signal quality
checks
> disabled
> ModemManager[4471]: <debug> [1507757864.713914]
[mm-iface-modem.c:894]
> mm_iface_modem_update_access_technologies(): Modem
> /org/freedesktop/ModemManager1/Modem/0: access technology
changed (umts ->
> unknown)
> ModemManager[4471]: <debug> [1507757864.719503]
[mm-iface-modem.c:1008]
> periodic_access_technologies_check_disable(): Periodic access
technology
> checks disabled
> ModemManager[4471]: <debug> [1507757864.726004]
[mm-broadband-modem.c:8282]
> disabling_step(): Modem has messaging capabilities, disabling
the Messaging
> interface...
> ModemManager[4471]: <debug> [1507757864.731147]
[mm-broadband-modem.c:5791]
> set_messaging_unsolicited_events_handlers(): (ttyUSB0) Removing
messaging
> unsolicited events handlers
> ModemManager[4471]: <debug> [1507757864.732277]
[mm-broadband-modem.c:5791]
> set_messaging_unsolicited_events_handlers(): (ttyUSB2) Removing
messaging
> unsolicited events handlers
> ModemManager[4471]: <debug> [1507757864.733760]
[mm-broadband-modem.c:8294]
> disabling_step(): Modem has location capabilities, disabling the
Location
> interface...
> ModemManager[4471]: <debug> [1507757864.734843]
> [mm-iface-modem-location.c:765] setup_gathering(): Need to
disable the
> following location sources: '3gpp-lac-ci'
> ModemManager[4471]: <debug> [1507757864.744200]
[mm-broadband-modem.c:8322]
> disabling_step(): Modem has 3GPP/USSD capabilities, disabling
the Modem
> 3GPP/USSD interface...
> ModemManager[4471]: <debug> [1507757864.745383]
[mm-port-serial.c:1237]
> mm_port_serial_open(): (ttyUSB0) device open count is 7 (open)
> ModemManager[4471]: <debug> [1507757917.238256]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB2): <-- '<CR><LF>^RSSI: 3<CR><LF>'
> ModemManager[4471]: <debug> [1507757917.248108]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>^RSSI: 3<CR><LF><CR><LF>^HCSQ:
> "WCDMA",29,15,37<CR><LF>'
> ModemManager[4471]: <debug> [1507757917.249324]
> [huawei/mm-broadband-modem-huawei.c:1543]
huawei_signal_changed(): 3GPP
> signal quality: 9
> ModemManager[4471]: <debug> [1507757917.256592]
[mm-iface-modem.c:1165]
> update_signal_quality(): Modem
/org/freedesktop/ModemManager1/Modem/0:
> signal quality updated (9)
> ModemManager[4471]: <debug> [1507757917.259668]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB2): <-- '<CR><LF>^HCSQ:
"WCDMA",29,15,37<CR><LF>'
> ModemManager[4471]: <info> [1507757938.156182]
[mm-iface-modem-3gpp.c:1169]
> update_registration_state(): Modem
/org/freedesktop/ModemManager1/Modem/0:
> 3GPP Registration state changed (searching -> idle)
> ModemManager[4471]: <debug> [1507757938.162515]
[mm-base-bearer.c:260]
> modem_3gpp_registration_state_changed(): Bearer not allowed to
connect, not
> registered in 3GPP network
> ModemManager[4471]: <debug> [1507757938.163074]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 6 (close)
> ModemManager[4471]: <debug> [1507757938.186571]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): --> 'AT+COPS=3,2;+COPS?<CR>'
> ModemManager[4471]: <debug> [1507757938.217214]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>+COPS:
> 1,2,"26203",2<CR><LF><CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.228361]
> [huawei/mm-broadband-modem-huawei.c:2038]
modem_3gpp_load_operator_name():
> loading Operator Name (huawei)...
> ModemManager[4471]: <debug> [1507757938.230356]
[mm-port-serial.c:1237]
> mm_port_serial_open(): (ttyUSB0) device open count is 7 (open)
> ModemManager[4471]: <debug> [1507757938.237333]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 6 (close)
> ModemManager[4471]: <debug> [1507757938.239402]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): --> 'AT^SYSINFOEX<CR>'
> ModemManager[4471]: <debug> [1507757938.267262]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>^SYSINFOEX:
> 2,3,1,1,,3,"WCDMA",41,"WCDMA"<CR><LF><CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.268511]
> [huawei/mm-broadband-modem-huawei.c:582]
load_access_technologies_finish():
> Access Technology: 'umts'
> ModemManager[4471]: <debug> [1507757938.269158]
[mm-iface-modem.c:894]
> mm_iface_modem_update_access_technologies(): Modem
> /org/freedesktop/ModemManager1/Modem/0: access technology
changed (unknown
> -> umts)
> ModemManager[4471]: <debug> [1507757938.269472]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 5 (close)
> ModemManager[4471]: <debug> [1507757938.281278]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): --> 'AT+CSQ<CR>'
> ModemManager[4471]: <debug> [1507757938.296941]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>+CSQ:
3,99<CR><LF><CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.297864]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 4 (close)
> ModemManager[4471]: <debug> [1507757938.298720]
[mm-iface-modem.c:1165]
> update_signal_quality(): Modem
/org/freedesktop/ModemManager1/Modem/0:
> signal quality updated (9)
> ModemManager[4471]: <debug> [1507757938.299179]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): --> 'AT+CSQ<CR>'
> ModemManager[4471]: <debug> [1507757938.312601]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>+CSQ:
3,99<CR><LF><CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.313516]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 3 (close)
> ModemManager[4471]: <debug> [1507757938.314367]
[mm-iface-modem.c:1165]
> update_signal_quality(): Modem
/org/freedesktop/ModemManager1/Modem/0:
> signal quality updated (9)
> ModemManager[4471]: <debug> [1507757938.315042]
[mm-broadband-modem.c:4908]
> set_unsolicited_result_code_handlers(): (ttyUSB0) Removing
unsolicited
> result code handlers
> ModemManager[4471]: <debug> [1507757938.315297]
[mm-broadband-modem.c:4908]
> set_unsolicited_result_code_handlers(): (ttyUSB2) Removing
unsolicited
> result code handlers
> ModemManager[4471]: <debug> [1507757938.315563]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 2 (close)
> ModemManager[4471]: <debug> [1507757938.327921]
[mm-broadband-modem.c:8334]
> disabling_step(): Modem has 3GPP capabilities, disabling the
Modem 3GPP
> interface...
> ModemManager[4471]: <debug> [1507757938.329574]
[mm-iface-modem-3gpp.c:1310]
> periodic_registration_check_disable(): Periodic 3GPP
registration checks
> disabled
> ModemManager[4471]: <debug> [1507757938.332616]
[mm-port-serial.c:1237]
> mm_port_serial_open(): (ttyUSB0) device open count is 3 (open)
> ModemManager[4471]: <debug> [1507757938.335165]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): --> 'AT+COPS=3,0;+COPS?<CR>'
> ModemManager[4471]: <debug> [1507757938.370516]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>+COPS:
> 1,0,"E-Plus",2<CR><LF><CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.371558]
> [huawei/mm-broadband-modem-huawei.c:2028]
> modem_3gpp_load_operator_name_finish(): loaded Operator Name: E-Plus
> ModemManager[4471]: <debug> [1507757938.372172]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 2 (close)
> ModemManager[4471]: <info> [1507757938.379425]
[mm-iface-modem-3gpp.c:1079]
> update_registration_reload_current_registration_info_ready(): Modem
> /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state
changed
> (registering -> roaming)
> ModemManager[4471]: <debug> [1507757938.391976]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): --> 'AT+CREG=0<CR>'
> ModemManager[4471]: <debug> [1507757938.412542]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.413389]
[mm-port-serial.c:1237]
> mm_port_serial_open(): (ttyUSB2) device open count is 2 (open)
> ModemManager[4471]: <debug> [1507757938.413937]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 1 (close)
> ModemManager[4471]: <debug> [1507757938.414343]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB2): --> 'AT+CREG=0<CR>'
> ModemManager[4471]: <debug> [1507757938.430404]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.432294]
[mm-port-serial.c:1237]
> mm_port_serial_open(): (ttyUSB0) device open count is 2 (open)
> ModemManager[4471]: <debug> [1507757938.432761]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB2) device open count is 1 (close)
> ModemManager[4471]: <debug> [1507757938.435627]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): --> 'AT+CGREG=0<CR>'
> ModemManager[4471]: <debug> [1507757938.461267]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.462188]
[mm-port-serial.c:1237]
> mm_port_serial_open(): (ttyUSB2) device open count is 2 (open)
> ModemManager[4471]: <debug> [1507757938.462626]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 1 (close)
> ModemManager[4471]: <debug> [1507757938.463019]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB2): --> 'AT+CGREG=0<CR>'
> ModemManager[4471]: <debug> [1507757938.483758]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.484400]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB2) device open count is 1 (close)
> ModemManager[4471]: <debug> [1507757938.486265]
[mm-broadband-modem.c:3648]
> modem_3gpp_cleanup_unsolicited_registration_events(): (ttyUSB0)
cleaning up
> unsolicited registration messages handlers
> ModemManager[4471]: <debug> [1507757938.489370]
[mm-broadband-modem.c:3648]
> modem_3gpp_cleanup_unsolicited_registration_events(): (ttyUSB2)
cleaning up
> unsolicited registration messages handlers
> ModemManager[4471]: <debug> [1507757938.497321]
[mm-port-serial.c:1237]
> mm_port_serial_open(): (ttyUSB0) device open count is 2 (open)
> ModemManager[4471]: <debug> [1507757938.503806]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): --> 'AT^CURC=0<CR>'
> ModemManager[4471]: <debug> [1507757938.524718]
[mm-port-serial-at.c:440]
> debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>'
> ModemManager[4471]: <debug> [1507757938.525473]
[mm-port-serial.c:1296]
> mm_port_serial_close(): (ttyUSB0) device open count is 1 (close)
> ModemManager[4471]: <info> [1507757938.526055]
[mm-iface-modem-3gpp.c:1169]
> update_registration_state(): Modem
/org/freedesktop/ModemManager1/Modem/0:
> 3GPP Registration state changed (roaming -> unknown)
> ModemManager[4471]: <debug> [1507757938.530230]
[mm-base-bearer.c:260]
> modem_3gpp_registration_state_changed(): Bearer not allowed to
connect, not
> registered in 3GPP network
> ModemManager[4471]: <debug> [1507757938.537998]
[mm-iface-modem.c:894]
> mm_iface_modem_update_access_technologies(): Modem
> /org/freedesktop/ModemManager1/Modem/0: access technology
changed (umts ->
> unknown)
>
>
> I think the problem is somewhere here to find, but I just don't
see the
> point
>
> The lines before those I just postet were about the
> --3gpp-register-in-operator, but as it failed, I just
disconnected and
> disabled again, but it nevertheless seemed to update some signal
quality
> stuff
>
> Is the problem something about that "Removing unsolicited result
code
> handlers" and "cleaning up unsolicited registration messages
handlers"
> stuff?
>
>
> Well I should now also say something about the hardware I use:
>
> I'm using a Huawei ME909s-120 with the mmcli version 1.4.0
>
>
> I hope you can help me, as I really have no more idea what to do
anymore
>
> If I can provide you any helpful information, just tell me
>
>
What's the error you get when trying to register in the operator
manually?
The sequence you posted looks mostly good to me, all that happens when
you disable the modem (e.g. removing unsolicited message handlers,
disabling periodic polling of reg info or signal quality...). There is
one thing, though, that gets in the middle of the disabling sequence,
which is the "AT+COPS=3,0;+COPS?" call and its response, but that may
just be because it was scheduled before the disabling sequence started
to happen, but that shouldn't have any big effect, I think.
--
Aleksander
https://aleksander.es
_______________________________________________
ModemManager-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
_______________________________________________
ModemManager-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
